export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Tapping Machine Manufacturers and Suppliers in India

Tapping Machine Suppliers

Quick answer: Tapping machines cut internal threads in drilled holes at controlled speed, with automatic reverse to back the tap out. The range includes bench tapping machines with auto reverse, gear head, multi spindle, pneumatic arm type and digital servo machines. Civil Mechanical India is the maker and direct supplier.

Civil Mechanical India is among the Tapping Machine manufacturers in India, producing dedicated threading machines for production and training. If you are looking for tapping machine suppliers in India, give us the tap size range, material and daily hole count and we will recommend a model.

Where hand tapping is slow and tends to break taps, a tapping machine drives the tap at a set speed and reverses at the preset depth. Our six items include a basic tapping machine, a bench model with auto reverse, a gear head machine with a mechanical drive, a multi spindle unit that taps several holes together, a pneumatic arm type that follows the operator's hand and a servo machine with a digital depth control.

Tap capacity runs from M3 up to about M24 across models. Spindle speed, reversal method and the arm reach decide how much work the machine can cover.

Last updated: November 2026

Bench Tapping Machine with Auto Reverse

Product code: CMI-NP-0843
Buy Bench Tapping Machine with Auto Reverse from India

Bench Tapping Machine with Auto Reverse is a column mounted bench tapping machine with automatic reversing, designed for tapping threaded holes in production and training with repeatable depth.

Gear Head Tapping Machine

Product code: CMI-NP-0844
Buy Gear Head Tapping Machine from India

Gear Head Tapping Machine is a floor mounted gear head tapping machine for larger threads, designed for tapping large holes up to M24 in thick components.

Multi Spindle Tapping Machine

Product code: CMI-NP-0845
Buy Multi Spindle Tapping Machine from India

Multi Spindle Tapping Machine is a three spindle tapping machine driven from a common gearbox, designed for tapping several holes at the same time in production workpieces.

Pneumatic Tapping Machine Arm Type

Product code: CMI-NP-0846
Buy Pneumatic Tapping Machine Arm Type from India

Pneumatic Tapping Machine Arm Type is an air operated tapping machine on an articulated arm, designed for fast tapping of repeat parts on large fabrications.

Servo Tapping Machine Digital

Product code: CMI-NP-0847
Buy Servo Tapping Machine Digital from India

Servo Tapping Machine Digital is a servo driven tapping machine with digital depth control, designed for precision tapping in blind holes with programmable depth. Key features include servo drive with torque control and digital control panel.

Tapping Machine range by function

FunctionProductsWhat to confirm
Bench and arm tappingBench Tapping Machine with Auto Reverse, Pneumatic Tapping Machine Arm TypeTap size range, arm reach, spindle speed, auto reverse and air pressure
Larger and multiple threadsGear Head Tapping Machine, Multi Spindle Tapping MachineMaximum tap size, gearbox ratio, spindle count and centre distance
Precision tappingServo Tapping Machine DigitalDigital depth resolution, servo power, thread pitch range and controller memory

How is a tapping machine different from a 6 mm tapping machine?

A 6 mm tapping machine is the small end of the range, set up for threads up to about M6 and suited to thin sheet, light fittings and electrical parts. The wider tapping machine group goes up to larger taps and includes gear head, multi spindle, pneumatic and servo models. Choose the 6 mm unit for light, high volume small tapping; move to the wider range when larger threads or several spindles are needed.

See also: 6mm Tapping Machine Suppliers

Full Tapping Machine product list

The complete Tapping Machine range (6 products), in alphabetical order:

Specifications and standards

What should I specify when buying a tapping machine?

Give the largest and smallest tap size, material, hole depth and blind or through type. Check the reach of the arm or the table size, spindle speeds, power and the reversing mechanism. A servo machine allows programmable depth, useful where hole depth varies. Ask for tap holders and chucks to match your taps.

When does a multi spindle tapping machine make sense?

When one component needs several holes tapped at once, such as flanges or engine covers, a multi spindle head taps them in one stroke with fixed spacing. It saves time on repeat batches but is made for one pattern. For mixed jobs, a single spindle arm machine is more flexible.

Who buys Tapping Machine?

Component manufacturers, auto parts shops, switchgear and electrical panel makers, general engineering workshops, polytechnics and ITI machinist trades buy tapping machines. A workshop order may pair a tapper with a radial drill and a deburring tool so holes are drilled, tapped and cleaned at one station. Training shops use bench models to teach thread depth and pitch.

Related ranges

Frequently asked questions

What tap sizes can a tapping machine handle?

Light bench models run taps from about M3 to M10, while gear head and heavy servo models go to M16 or M24. Material matters too, as steel needs more torque than aluminium. Tell us the biggest tap and material.

Why does a tapping machine reverse automatically?

Automatic reversal backs the tap out at preset depth by a clutch, a limit switch or servo control, preventing the tap from jamming at the bottom of a blind hole. This reduces tap breakage.

Is pneumatic tapping better than electric?

Pneumatic tapping arms are light, torque-limited by air pressure and suited to repeat work where the arm reaches the part. Electric machines give a steadier torque curve. The choice depends on available compressed air.

Can you export tapping machines?

Yes, we serve domestic customers and ship overseas. Machines are protected with oil on bright parts and crated or boxed. Please send the quantity and country of delivery.

Tender enquiries

Request a tender quotation

We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Tapping Machine will be prepared accordingly.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.