Packaging labels testing instruments manufacturers in India are frequently contacted by converters who need to prove that a label will stay on a bottle, release cleanly on an applicator and scan at the end of the line. Civil Mechanical India is one of the suppliers in India of standard peel, tack and shear testers along with barcode and die-cut tools.
Pressure sensitive labels are tested as a laminate of face stock, adhesive and liner. Peel adhesion, loop tack, rolling ball tack and static shear describe how well the adhesive grips and holds. The release force tester shows how easily the liner separates, which affects dispensing speed. Thickness gauges, a strip cutter, a standard pressure roller and a digital microscope support specimen preparation and die-cut inspection.
A barcode print quality verifier completes the set for brands that audit scan grades.
Last updated: November 2026
Tensile-based tester that measures the force to peel a pressure sensitive label from a test panel at 180 degrees. Used by label converters and brand owners to qualify label stock on glass, PET and HDPE containers.
Handheld verifier that grades the print quality of 1D and 2D barcodes on labels against ISO symbology standards. Used by label printers and FMCG packers to ensure scan reliability.
Digital microscope with measuring software used to inspect kiss-cut depth, liner penetration and edge quality of die-cut label laminates. Used in label converters for press set-up and complaint analysis.
Contact thickness gauge measuring the total or individual thickness of label laminates, facestock, adhesive layer and liner. Used by converters to verify calliper before die-cutting and printing.
Peel tester set up for measuring the force to separate the silicone-coated release liner from the adhesive of label laminate. Used by label stock makers and converters to control easy dispensing.
Measures the instant grab or quick-stick of a label adhesive by forming a loop and touching it to a test panel. Used by label converters and adhesive suppliers to choose grades for fast application lines.
Double-blade cutter that slices label and adhesive tape specimens into exact 25 mm wide strips with clean parallel edges. Used for preparing peel, tack and shear samples.
Inclined track instrument that measures the distance a steel ball rolls across an adhesive surface to rate its initial tack. Used for rapid screening of label and tape adhesives.
Rubber covered roller with a fixed mass used to bond label specimens to test panels under repeatable pressure. Used in peel, tack and shear sample preparation for label QC labs.
Multi-station rack that hangs standard weights from label strips bonded to panels and times the failure. Used to check shear resistance of label adhesives on containers subjected to warm storage.
| Function | Products | What to confirm |
|---|---|---|
| Adhesion performance | 180 Degree Peel Adhesion Tester for Labels, Loop Tack Tester for Pressure Sensitive Labels, Rolling Ball Tack Tester for Label Adhesives, Static Shear Holding Power Tester for Labels | Test speed, load cell range, panel material, dwell time, shear weight and number of stations |
| Release and dispensing | Liner Release Force Tester for Label Stock | Peel speed range, force range, platen size and method, for example FINAT FTM 3 or 4 |
| Specimen preparation and geometry | Precision Strip Cutter for Label Specimens 25 mm, Standard 2 kg Pressure Roller for Label Testing, Digital Thickness Gauge for Label Laminates, Digital Microscope for Die Cut Depth Inspection of Labels | Cutter width accuracy, roller mass and rubber hardness, thickness resolution and microscope magnification |
| Print and code quality | Barcode Print Quality Verifier for Labels | Symbologies supported, ISO 15416 grading, aperture and light source, and software for reports |
Adhesive Testing Instruments cover bonded joints and adhesive materials, such as lap shear, butt tensile and viscosity of hot melts. Label instruments focus on the finished pressure sensitive laminate: peel, tack, holding power and release from the liner at light forces. A label converter mostly needs this group, while an adhesive maker needs both to characterise formulations.
See also: Adhesive Testing Instruments
The complete Packaging Labels Testing Instruments range (10 products), in alphabetical order:
Confirm the method set you follow, such as FINAT, PSTC or ASTM D3330, as it fixes test speeds, panel types and dwell times. Check force range of the load cell against your lightest and strongest adhesives, availability of stainless steel panels, and the standard roller. Also ask about software, calibration weights and whether specimen cutters are included.
Peel adhesion measures the force to remove a label from a panel after a set dwell, while tack measures grab on very light contact. Loop tack and rolling ball tack both reflect initial grab, with different numeric scales. A converter normally reports both because applications, such as high-speed applicators, depend on tack.
When customers require ISO 15416 or GS1 grades on labels or when scan failures cause chargebacks. A verifier grades contrast, edge definition and decode, giving traceable evidence. Check the symbologies you print, aperture size for small codes, and report output for customer audits.
Label converters, narrow web printers, adhesive and release liner makers, bottle and pack fillers in pharma, beverage and cosmetics, and independent packaging labs buy these instruments. Converters typically order a peel and tack set with a pressure roller and strip cutter, then add the release force tester and the barcode verifier when a retail or pharma customer sets written acceptance criteria.
Peel measures the force to pull the label away at an angle, while static shear measures how long a label holds under a constant load parallel to the surface. Shear predicts creep and slippage on curved or warm packages.
Often a universal tensile machine with a load cell and suitable fixtures can run both, but dedicated testers give dependable speeds and simple operation. Tell us your volume and methods and we can advise which option fits.
Yes. Civil Mechanical India supplies label printers and converters across India, and exports as well. Delivery, setup and operator training details are mentioned in the quotation we send.
They are designed for common label and tape test methods such as FINAT, PSTC and ASTM series. Send the method you must meet so that panels, speeds, rollers and dwell times can be matched.
Load cells and timers are checked before dispatch. Calibration weights can be supplied with the machine, and further certificates arranged if your quality system requires them.
Civil Mechanical India is an established manufacturer and supplier for tender requirements from India, handling civil laboratory and industrial testing tenders and bulk and OEM orders for mechanical engineering and testing laboratory equipment. On receipt of your tender specifications, we will submit a complete quotation for Packaging Labels Testing Instruments.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.
