General lab testing equipment manufacturers in India are often approached last, even though every product-specific tester depends on conditioning, weighing and heating done with these units. Civil Mechanical India is among the suppliers in India that pair this common equipment with its material-specific testers in one order.
These instruments are not tied to a single material. Ovens and muffle furnaces dry or ash samples, balances weigh them, refrigerated baths hold temperature, stirrers prepare mixes, and the pH meter, Karl Fischer titrator and Brookfield-type viscometer characterise liquids and moisture. The melt flow index tester is included because plastics and polymer labs use it as a routine release test.
A programmable environmental chamber adds temperature and humidity cycling for ageing and conditioning work. Buyers usually select this group to complete a lab whose primary testers have already been chosen.
Last updated: November 2026
Microprocessor benchtop pH and conductivity meter with automatic temperature compensation and multi-point calibration for process water, effluent and chemical samples. Used in industrial QC and environmental labs.
Rotational viscometer with LCD display, interchangeable spindles and selectable speeds for liquid and paste viscosity measurement up to 2,000,000 mPa.s. Used in paint, adhesive, chemical and food QC labs.
Extrusion plastometer with load weights and automatic cutter for measuring melt flow rate of thermoplastics. Used in plastic compounding, pipe and film industries to verify resin grade.
Stainless steel forced convection oven with PID control and adjustable air flow for drying, ageing and sterilising samples. Used in QC labs for plastics, rubber, textiles, pharma and construction materials.
Top-loading electronic precision balance with a large stainless steel pan, internal or external calibration and RS232 output. Used for weighing samples in QC labs, plants and material testing facilities.
Volumetric Karl Fischer titrator with automatic burette and platinum electrode for water content measurement in oils, polymers, chemicals and pharma raw materials. Used in industrial QC labs.
Digital overhead stirrer with high torque motor and variable speed for mixing viscous liquids, pastes and slurries. Used in paint, adhesive, polymer and chemical development and QC labs.
Programmable box furnace reaching 1200 deg C for ashing, loss on ignition and heat treatment of samples. Used in cement, ceramics, polymer filler, coal and metal QC labs.
Temperature and humidity chamber with programmable profiles for conditioning and stability testing of materials, components and packaging. Used in plastics, electronics, pharma and automotive QC labs.
Stainless steel thermostatic bath with refrigeration and pump circulation for holding samples between -10 and 100 deg C. Used for viscosity, penetration, flash and temperature-conditioning tests in QC labs.
| Function | Products | What to confirm |
|---|---|---|
| Heating and drying | Forced Air Circulation Hot Air Oven 250 Litre, Muffle Furnace 1200 deg C with PID Programmer | Chamber volume, maximum temperature, uniformity across shelves, controller type and whether 415 V three phase is required |
| Weighing and mixing | High Capacity Precision Balance 6200 g x 0.01 g, Laboratory Overhead Stirrer 100 Litre Capacity | Capacity and readability, pan size, calibration option, stirrer torque range and shaft or paddle type |
| Liquid and moisture analysis | Benchtop pH and Conductivity Meter with ATC Probe, Karl Fischer Titrator for Moisture Determination, Digital Brookfield Type Rotational Viscometer 2000000 mPa.s | Measurement range and resolution, probe types, reagent supply for titration and available spindle set |
| Conditioning and polymer release | Programmable Environmental Test Chamber 225 Litre, Refrigerated Circulating Water Bath 20 Litre, Digital Melt Flow Index Tester for Plastics | Temperature and humidity range, ramp rate, bath stability, die and weight set, and the test method used |
The parent range is organised by the material or product under test, such as soil, cartons or pipes, and each group holds machines built around a specific standard. This sub-category holds the common utilities that every one of those groups depends on. Think of it as the foundation: ovens, balances and chambers that condition, weigh and heat samples before or after the specific test machine does its work.
See also: Civil Industrial Testing Lab Instruments
The complete General Lab Testing Equipment range (10 products), in alphabetical order:
Confirm working volume, maximum temperature, uniformity across the chamber at your set point, and controller accuracy. Check whether your method needs forced air or natural convection, the shelf count, safety cut-out, and the supply, since larger ovens and furnaces draw high current and may need 415 V three phase. Ask for a calibration report with a temperature survey.
Match capacity and readability to the smallest and largest sample you weigh, since a 6200 g by 0.01 g balance suits sample preparation but not microgram work. Check the draft shield, stabilisation time, internal or external calibration and output to a PC or printer. Place it on a vibration-free bench away from air flow.
Choose one when your customer or standard requires conditioning at set temperature and humidity, or when you run ageing, shelf life or stress tests. Check the working range, ramp rates, humidity accuracy, water supply and drain needs, and whether a programmable controller with data logging is included.
Plastic and packaging converters, chemical and paint makers, pharma and food units, automotive suppliers, construction material plants and third-party labs buy this group. It is typically added to a larger order of product-specific testers so that conditioning, weighing and heating equipment arrive together, with consistent documentation and a single point for service.
Yes. Many buyers combine ovens, balances and chambers with packaging, plastics or cement testers in a single quotation. This keeps delivery, installation and calibration paperwork together and makes service follow-up easier.
It measures how readily a molten thermoplastic flows through a standard die under a set load and temperature, giving a number that helps grade resin batches. Converters use it for incoming resin checks and for regrind or masterbatch control.
Units are checked before dispatch, and calibration certificates can be arranged. If your quality system needs an accredited laboratory certificate, say so in the enquiry so the extra step is built into the schedule.
Yes. Civil Mechanical India supplies laboratory utilities against tenders and direct orders in India. Send the specification, quantity and delivery site, and a technical compliance statement can be prepared.
Yes. Export packing and documentation are available, and controls and heaters can be built for local voltage. Please state the destination country and plug standard.
Civil Mechanical India is one of the leading manufacturers and suppliers in India for tender requirements, covering civil laboratory and industrial testing tenders and the bulk and OEM supply of mechanical engineering and testing laboratory equipment. Kindly share your tender specifications and we shall submit a complete quotation for General Lab Testing Equipment.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.
