Axial Flow Turbine test bed
Product code: TEE-0001Buy Axial Flow Turbine test bed from India
Axial Flow Turbine test bed
A thermal lab needs hardware that handles real fuel, steam and compressed air, so buyers want thermal engineering lab equipment manufacturers in India with proven engine and boiler experience. Civil Mechanical India builds the test benches and set-ups in this category, and as suppliers in India we package dynamometers, panels and data acquisition together.
The range is grouped by energy conversion machine. Engine benches include single cylinder two stroke and four stroke petrol and diesel units, four cylinder petrol and diesel benches, gasoline direct injection, motor cycle dynamometer, multi engine and turbo jet test benches. Ignition and cruise control trainers support automobile courses.
Air machines cover single stage, two stage and rotary compressors, an air blower setup and a subsonic nozzle. Steam work is handled by the steam turbine power plant, Marcet boiler, steam nozzle apparatus and calorimeters such as exhaust gas and separating and throttling types.
Last updated: November 2026
Axial Flow Turbine test bed
COIL ON PLUG IGNITION SYSTEM TRAINER
CRUISE CONTROL TRAINER
DISTRIBUTOR IGNITION SYSTEM TRAINER
Exhaust Gas Calorimeter
Four Stroke Four Cylinder Petrol Engine Test Bench
Four Stroke Four Cylinder Diesel Engines Test Bench
Four Stroke Four Cylinder Diesel Engines Test Bench
Gasoline Direct Injection Engine Test Bench
Motor Cycle Dynamometer Test Bench
Multi Engine Test Bench
Single Cylinder Four Stroke Diesel Engine Test Bench
Single Cylinder Four Stroke Petrol Engine Test Bench
Single Cylinder Two Stroke Petrol Engines Test Bench
Single Cylinder Two Stroke Petrol Engines Test Bench
Spark Ignition System Trainer
Turbo Jet Engine Test Bench
Single Cylinder Two Stroke Petrol Engines Test Bench
Single Stage Air Compressor Setup with data Acquisition
Computerised Two Stage Air Compressor Test Bench
Air Blower Test Setup
Rotary Air Compressor Test Bench
Steam Turbine Power Plant Setup
Marcet Boiler Test Setup
Separating & Throttling Calorimeter with mini boiler Test Bench
Subsonic Air Nozzle Test Setup
Steam Nozzle Performance Apparatus with Compressor
Thermal engineering equipment studies machines that convert fuel or steam energy into work, so it uses engines, compressors, boilers and turbines with dynamometers, fuel meters and gas calorimeters. Heat and mass transfer equipment looks at heat flow itself in small bench rigs: conduction slabs, convection cells and exchangers. Engine and power plant labs need floor space and exhaust arrangements; heat transfer rigs fit on a bench.
See also: Heat and Mass Transfer lab equipment
The complete Thermal Engineering Lab Equipment range (24 products), in alphabetical order:
Fix the engine type and power rating first, then check the loading device, speed and torque measurement, fuel flow measurement, air box with orifice, and exhaust gas thermometer. Ask about data acquisition and software for performance curves, cooling water requirement, starting arrangement (self start or hand crank), foundation and exhaust ducting. Confirm whether the engine is new or as per college specification.
A separating calorimeter removes moisture from wet steam, and a throttling calorimeter expands the steam to find its dryness fraction. When the steam is very wet, both are used together. The mini boiler test bench supplies the steam so students can measure dryness at a given pressure.
A single stage reciprocating compressor with data acquisition is enough for volumetric efficiency and isothermal efficiency studies. Two stage and rotary compressors suit final year labs where intercooling, pressure ratio and free air delivery are studied. Specify tank volume and pressure rating.
Mechanical, automobile and production engineering colleges, polytechnics, ITIs, research labs and automobile training centres buy thermal engineering equipment. A thermal lab package often combines two or three engine benches, a compressor, a boiler and steam turbine set, with spare parts and consumables listed in the tender.
Civil Mechanical India supplies across India, and installation, alignment of the dynamometer, and commissioning can be arranged. Please share the lab layout, exhaust route and electrical supply so we can advise on foundation and cooling water.
Yes, benches can be quoted with sensors, a data acquisition unit and software for brake power, specific fuel consumption, efficiency and heat balance. Tell us whether you need a laptop or a PC with the supply.
Typical readings include rotational speed, compressor delivery pressure, exhaust gas temperature, fuel flow and thrust. The bench is meant for demonstration of gas turbine principles in a controlled laboratory environment.
No, petrol and diesel engines are separate benches because compression ratio, fuel system and ignition differ. We supply both four stroke and two stroke options so you can select by syllabus.
Yes, we export. Packing, documentation and electrical standards are agreed in the order. Engines are shipped without fuel and oil as required by freight rules.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Thermal Engineering Lab Equipment.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.