Bathroom products face daily water pressure, thousands of operating cycles and humid corrosion, and brands now publish test claims for them. Manufacturers looking for bathware testing instruments manufacturers in India can order matching rigs from us, and our suppliers in India service supplies faucet factories, sanitaryware plants and certification labs.
The range is divided into brassware, ceramics and finishes. For taps and showers, the endurance cycle tester, the hydrostatic leak bench and the showerhead flow and spray pattern bench show whether a mixer survives a decade of use and delivers the claimed flow. The cistern flush rig checks WC water consumption.
Ceramic and acrylic items are checked with the autoclave crazing tester, the thermal shock unit for washbasins, the static load rig for basins and vanity units, and the falling ball rig for tubs and trays. Finish durability is covered by the neutral salt spray chamber and the coulometric thickness tester for chrome and nickel plating. Water supply and drain are important planning items for the whole lab.
Last updated: November 2026
Pressure autoclave that subjects glazed ceramic sanitaryware to steam at 350 kPa to check glaze crazing resistance. Used by washbasin and WC manufacturers for batch qualification and glaze-body fit studies.
Test rig with a measuring tank that checks flush volume, refill time and valve leak tightness of WC cisterns and flushing mechanisms. Used by sanitary ware and flushing valve manufacturers for performance acceptance.
Coulometric thickness tester that dissolves a small area of plating anodically to measure layer thickness of chrome, nickel and copper on taps and fittings. Used by plating shops and bathware factories for coating control.
Vertical drop rig with a steel ball release for impact testing acrylic and enamelled bathtubs, shower trays and basin surfaces. Used by acrylic and ceramic bath product makers to prove resistance to impact.
Hydraulic test bench that applies water pressure up to 25 bar to taps, mixers and valves to check body strength and seat leak tightness. Used by bath fittings makers for 100 percent and sample testing.
Salt fog corrosion chamber that tests chrome plated taps, showers and accessories with 5 percent NaCl mist at 35 deg C. Used by bath fittings manufacturers for plating quality validation.
Test bench that measures flow rate, spray angle and pressure drop of hand showers and overhead rain showers. Used by bath fitting producers to check water-saving class and spray uniformity.
Loading frame with a load cell and distribution pad that applies vertical load to wall-hung washbasins and brackets to test fixing strength. Used by ceramic and composite basin makers to qualify designs.
Automated cycle testing machine that opens and closes taps and mixers with water flow to prove durability of cartridges and seals. Used by bath fittings manufacturers for mechanical endurance validation.
Dual bath thermal shock unit that alternately flushes ceramic basins and fittings with hot 93 deg C and cold 15 deg C water to check cracking. Used by sanitaryware plants to check body strength and glaze under temperature changes.
| Function | Products | What to confirm |
|---|---|---|
| Taps and showers | Tap Endurance Cycle Tester for Bath Faucets, Faucet Hydrostatic Pressure and Leak Test Bench, Showerhead Flow Rate and Spray Pattern Test Bench | Cycle speed and counter, flow and temperature control, pressure up to 25 bar, number of stations and the standard being followed. |
| Toilets and cisterns | Cistern Flush Volume and Leak Test Rig for WC | Measuring tank volume, water supply head, leak detection method and flush volume range to be verified. |
| Ceramic and acrylic fixtures | Static Load Test Rig for Washbasins and Vanity Units, Falling Ball Impact Rig for Bathtubs and Trays, Thermal Shock Test Unit for Ceramic Washbasins, Autoclave Crazing Resistance Tester for Glazed Sanitaryware | Maximum load and frame size, ball mass and drop height, bath temperatures, autoclave pressure and sample capacity. |
| Plating and corrosion | Neutral Salt Spray Chamber for Chrome Plated Bath Fittings, Coulometric Coating Thickness Tester for Chrome and Nickel Plating | Chamber volume, test duration capability, thickness range for each layer, cell size and electrolyte supply. |
The ceramics range tests the material and process: slip viscosity, dilatometry, glaze hardness and body strength. Bathware instruments test finished products in use, including taps, showers, cisterns, washbasins and baths. They also cover brass and plated fittings, which ceramics testing does not. A sanitaryware manufacturer needs the thermal shock and crazing items from the bathware range plus material tools from the ceramics page.
See also: Porcelains and Ceramics Testing Instruments
The complete Bathware Testing Instruments range (10 products), in alphabetical order:
Look at how many stations are provided, cycle speed, the way the handle is actuated for single lever mixers, and hot and cold water control. A counter with automatic stop, adjustable angle and torque on the handle, and a leak detection option make the test credible. Water supply, heater power and drain should be planned before delivery.
The bench must provide the pressure level your standard asks for, up to 25 bar for some tests, with a pump or intensifier, gauge accuracy and safe enclosure. Check the number of fittings it can hold, quick-connect adapters for different inlet threads, and a hold timer. A drain tray and splash guard are necessary.
Confirm volume for the number of taps or fittings you load, the material of the chamber, saturator temperature and fog collection rate. Chrome plated brass is usually tested for 96 to 240 hours, so check long-run stability, reagent tank size and automatic water top-up. Add a coulometric tester to verify layer thickness.
Faucet and brass fittings manufacturers, sanitaryware and washbasin plants, bathtub and shower enclosure makers, plumbing brands that audit contract manufacturers, and product certification labs buy this range. A faucet plant normally installs the endurance tester, pressure bench and salt spray chamber first, then adds flow, plating thickness and ceramic checks when the product range widens to showers and sanitaryware.
Yes. We manufacture and ship these rigs to plants in India and overseas. Share the product range and standards, and we will quote with matching fixtures and water and power requirements.
Standards commonly call for hundreds of thousands of open-close cycles, and some brands run a million. A tester with several stations and a fast cycle speed shortens the time. Confirm your required cycle count so that we can propose the machine speed.
Hot and cold water alternately flowing over a ceramic basin stresses the glaze and body. The unit repeats this cycle and the basin is then examined for cracks or crazing. It checks both material quality and glaze fit.
The bench measures flow rate against pressure and uses a patternator to check the water distribution of the spray. Please mention whether you need hand showers, overhead rainfall heads or both, so we can confirm the fixture.
Most rigs need a water supply, drain, electric supply and sometimes compressed air. We provide a utilities sheet with the quotation, and commissioning support can be requested at order stage.
Civil Mechanical India is an established manufacturer and supplier for tender requirements from India, handling civil laboratory and industrial testing tenders and bulk and OEM orders for mechanical engineering and testing laboratory equipment. On receipt of your tender specifications, we will submit a complete quotation for Bathware Testing Instruments.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.
