Printed packaging is rejected for scuffed ink, wrong density or a varnish that dulls after lamination, and each of those faults can be measured. Our printing testing instruments manufacturers in India programme turns those checks into bench and press-side tools, and our suppliers in India network ships them to converters, ink plants and third-party labs.
The range follows the path of a print job. Proofing and ink checks come first: the printability tester and the Zahn and Ford cup set tell you how an ink or paper behaves before the press is booked. During the run, the reflection densitometer, the gloss meter and the registration and dot gain microscope keep colour and sharpness within tolerance.
Finished sheets and reels are then abused on purpose. The ink rub tester and the tape adhesion tester predict scuffing and ink pick-off in transit, while the xenon chamber ages prints to estimate fade on shelf. Roller and blanket hardness and thickness gauges look after the press itself. Together they make a compact print QC corner for a flexo, gravure or offset plant.
Last updated: November 2026
Machine that rubs printed samples against one another to evaluate scuff and abrasion resistance. Used by packaging and label printers. It helps decide whether prints survive transport and shelf handling.
Zahn and Ford cups with stand for checking ink viscosity at the press. Used by flexographic and gravure printers. Regular checks help keep ink flow and print density stable during runs.
Applies standard tape to printed film and peels at controlled force to see ink removal. Used for packaging films and labels. It gives repeatable assessment of film printing before converting or laminating.
Gloss meter measuring specular gloss at 20, 60 and 85 degrees on printed paper. Used in magazine, packaging and label printing. Readings help compare varnishes, laminates and coated stocks consistently.
Xenon arc chamber that simulates sunlight to test the fade resistance of inks and prints. Used by ink and packaging producers. It speeds up ageing so shelf life of printed packs can be predicted.
Illuminated measuring microscope with reticle scales for checking print registration, dot size and dot gain on offset, flexo and gravure printed sheets and labels during press make-ready and QC.
Laboratory proofing press that prints strips of ink on paper at controlled pressure and speed. Used by ink makers, paper mills and printers for comparative testing.
Shore A durometer stand for press rollers and printing blankets. Used in offset and flexo press room maintenance. Regular checks tell when worn or hardened rollers must be replaced for good print.
Handheld densitometer measuring optical density of CMYK inks, dot gain and print contrast. Used on offset, flexo and gravure presses. Results keep ink film thickness consistent from start to end of a press run.
Dial thickness gauge with a wide flat anvil for measuring the thickness of offset blankets, printing rollers covers and plates, used by print shops to set packing and impression pressure correctly.
| Function | Products | What to confirm |
|---|---|---|
| Ink and substrate behaviour | Printability Tester for Inks and Papers, Ink Viscosity Cup Set with Flow Timing Stand | Strip width and printing pressure range of the proofer, cup sizes (Zahn or Ford number) and whether the ink is solvent, water or UV based. |
| Colour, density and gloss on print | Reflection Densitometer for Print Quality Control, Print Gloss Meter for Coated Paper and Inks, Print Registration and Dot Gain Measuring Microscope | Density filters (status T or E), gloss angles, aperture size, reticle scale and whether a calibration tile is supplied. |
| Durability of the printed layer | Ink Rub Resistance Tester for Printed Surfaces, Print Adhesion Tape Tester for Printed Film, Print Light Fastness Xenon Test Chamber | Rub load and stroke count, tape type and peel speed, xenon lamp power, irradiance control and chamber specimen area. |
| Press rollers and blankets | Printing Plate Hardness and Roller Hardness Tester, Rubber Roller and Blanket Thickness Gauge | Shore scale, anvil diameter, thickness range and resolution of the dial, and roller diameters the stand can hold. |
Adhesive instruments measure the strength of a bond that holds two surfaces together, such as peel and shear on tapes and labels. Printing testing instruments judge the printed layer itself: how dense, glossy, sharp and durable the ink film is. The only overlap is the print adhesion tape tester, which checks whether ink stays anchored to film. A converter running labels usually needs both groups, but the print room list is led by densitometer, gloss and rub tests.
See also: Adhesive Testing Instruments
The complete Printing Testing Instruments range (10 products), in alphabetical order:
Match the instrument to the standard your customers quote. Ask for the density status (T for process inks), measuring geometry, aperture and the angles needed, usually 60 degrees for paper and 20 degrees for high-gloss varnish. Confirm that a reference tile ships with the unit, how often it should be re-verified, and whether the readings can be exported as a log for brand-owner audits.
Use the rub tester when the risk is scuffing during stacking, shipping or handling, and the tape tester when the risk is ink lifting from film or foil. For packaging film, most plants run both. Check the rub load, stroke length and cycle counter, and the peel angle and speed on the tape tester, and agree the acceptance test method with the customer before purchase.
Look at the irradiance range and whether it is controlled by a sensor, the black panel temperature limit, humidity control, and the number of samples the rack holds. Ask for the filter type, lamp life and water quality needs. A chamber with sensor control gives repeatable exposure, which is what a brand-owner approval report depends on.
Flexographic, gravure and offset packaging printers, label converters, ink and varnish manufacturers, paper and board mills, and third-party print labs buy this range. A typical order for a new press-side QC bench pairs the densitometer, gloss meter and viscosity cups with a printability tester, then adds the xenon chamber and rub tester when a brand-owner starts asking for durability data. Roller shops usually add the hardness and thickness gauges.
Yes. We manufacture and ship these instruments to printers and labs across India and to export buyers. Please share the country, voltage and plug type, and whether you need packing for sea or air freight, so the quote carries the correct power fitting and documentation.
Dot gain is the increase in printed dot size compared with the plate or film dot, caused by ink spread and press pressure. A measuring microscope with a reticle lets the operator read dot size directly on the sheet, so plate and impression settings can be corrected before the whole run is spoiled.
Zahn cups are common for low-viscosity solvent and water-based inks, while Ford cups suit slightly thicker fluids. The right cup gives an efflux time of roughly 20 to 60 seconds, which is the range where timing is most repeatable. Your ink supplier's data sheet normally names the cup number.
Densitometers and gloss meters are supplied with reference tiles for checking readings, and mechanical items such as gauges carry a factory inspection record. Tell us if you need traceable calibration certificates for an audit, and we will confirm what can be arranged for the specific model.
Yes, the chamber is meant for flat printed samples such as labels, cartons and film swatches, held on a rack in front of the lamp. Share the largest sample size and the exposure standard you follow, so we can confirm the rack and irradiance settings.
We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Printing Testing Instruments will be prepared accordingly.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.
