Excavator Hydraulic System and PLC Control Training System
Product code: CIVIL-EHS-137-0001Buy Excavator Hydraulic System and PLC Control Training System from India
Excavator Hydraulic System and PLC Control Training System
Heavy equipment institutes asking for Excavator Hydraulic Training System manufacturers in India want to teach on circuits that resemble the machines in the field. Civil Mechanical India builds trainers for the front attachment, pump, swing, travel and electro-hydraulic control, and is a practical choice among suppliers in India for construction machinery training.
An excavator hydraulic system combines several circuits, so the range separates them. The boom, arm and bucket model uses a hydraulic power pack and directional valves to show linkage motion and cylinder control. The pump and motor unit reproduces a variable displacement pump with pressure controls for testing and performance studies. The swing and travel trainer adds counterbalance valves and brakes to show slewing and travel.
For control, the proportional valve trainer has amplifier cards and PLC input so students learn the electrical signal chain behind smooth boom movement, and the fault diagnosis simulator switches in leaking cylinders, clogged filters and worn pumps. The flagship one-piece unit with tank, body and PLC integrates these. Check pump flow, relief pressure setting, oil volume and tank cooling before ordering.
Last updated: November 2026
Excavator Hydraulic System and PLC Control Training System
Scaled excavator front attachment with boom, arm and bucket cylinders driven by a hydraulic power pack and directional valves for studying linkage motion and cylinder control.
Trainer with proportional directional valves, amplifier cards and PLC input enabling smooth control of excavator functions and learning of electro-hydraulic signal chains. Key highlights include proportional valves with amplifiers and pLC joystick signal input.
Simulator with switchable faults such as leaking cylinders, clogged filters and worn pumps for practising diagnosis of hydraulic and PLC control problems on excavators. Key highlights include twelve switchable hydraulic and electrical faults and pressure and flow test points.
Unit with variable displacement pump, hydraulic motor and pressure controls reproducing an excavator hydraulic circuit for maintenance, testing and performance studies. Key highlights include variable displacement axial piston pump and hydraulic motor with load brake.
Trainer reproducing swing motor and travel drive hydraulic circuits with counterbalance valves and brakes to teach machine slewing, travel and braking operation. Key highlights include swing motor and travel motor circuits and counterbalance valves.
| Function | Products | What to confirm |
|---|---|---|
| Front attachment model | Excavator Boom Arm and Bucket Cylinder Training Model | scale, cylinder sizes and hydraulic power pack |
| Proportional and PLC control | Excavator Electro Hydraulic Proportional Valve Trainer | valve amplifier type and the PLC interface |
| Fault diagnosis | Excavator Hydraulic Fault Diagnosis Training Simulator | number of faults and the gauges fitted |
| Pump, motor and drives | Excavator Hydraulic Pump and Motor Training Unit, Excavator Swing and Travel Drive Hydraulic Trainer | displacement, pressure rating and counterbalance valves |
A basic hydraulic trainer teaches generic circuits with a power pack, cylinders, directional and pressure valves on a general-purpose board. The excavator system applies the same principles to mobile machinery: variable displacement pumps, counterbalance valves for swing, proportional control and PLC input. Choose basic hydraulics for fundamentals and the excavator range for mobile equipment courses where students must diagnose machine-specific faults.
See also: Basic Hydraulic Training System
The complete Excavator Hydraulic Training System range (6 products), in alphabetical order:
Check pump type and flow in litres per minute, the system relief pressure, motor rating of the power pack, oil tank volume and cooler, and hose and fitting standard. Ask about guards on the moving linkage and a pressure gauge at each test point. Plan floor space and an oil spill tray, and confirm the oil grade to be used for commissioning.
They let an instructor switch in typical faults, such as leaking cylinders, clogged filters or a worn pump, so students use pressure and flow readings to locate the cause. The skill transfers directly to field troubleshooting. Ask how many faults are available and whether they are controlled by key switches or a PLC screen.
Not for basic diplomas, but it is important where machines use electro-hydraulic control. Students see how amplifier cards and PLC output create smooth, graded movement. Confirm valve make, current range and the PLC interface so the lab can reuse existing programming equipment.
Construction equipment institutes, ITI and polytechnic mechanical departments, and heavy machinery operator training centres buy these trainers. Engineering colleges that teach mobile hydraulics and fluid power use the pump and motor unit, and manufacturers training service staff use the proportional valve and fault simulators. A common order includes the front attachment model, a pump unit and the fault trainer so that students see construction, performance and diagnosis in sequence.
Yes, it is a scaled front attachment with boom, arm and bucket cylinders driven by a hydraulic power pack and directional valves, which lets students observe linkage geometry and cylinder control.
The variable displacement pump and hydraulic motor unit has pressure controls and is described for maintenance, testing and performance studies, including flow against pressure observations.
The flagship excavator hydraulic and PLC control system and the proportional valve trainer include PLC input. Confirm PLC brand and available programming software with us before ordering.
Regular oil level and filter checks, and a clean oil change at the interval recommended in the manual. Keep a spill tray under the bench and use the specified hydraulic oil grade.
Yes, we handle export dispatch of these trainers; mention the port, supply voltage and frequency so the power pack motor and wiring match your region.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Excavator Hydraulic Training System.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.