A metal part is accepted on its certificate, and the certificate rests on tensile, hardness, impact and chemistry results. Our metal components testing instruments produce those results in a factory lab. As metal components testing instruments manufacturers in India and suppliers in India, we serve foundries, forging shops and auto component plants.
The range covers the usual tests on steel, cast iron and non-ferrous parts. The servo-hydraulic universal testing machine gives tensile and compression data. Impact energy is measured on Charpy and Izod pendulum machines. Hardness is tested on Rockwell and micro Vickers testers. The optical emission spectrometer confirms alloy grade, and the eddy current meter checks conductivity of non-ferrous metals. Rotating beam fatigue, salt spray corrosion and ultrasonic thickness gauges cover durability and in-service inspection.
A foundry may start with the spectrometer, hardness and tensile equipment, with impact and corrosion testers added for customer approvals.
Last updated: November 2026
Pendulum impact tester measuring absorbed energy of notched metal specimens in Charpy mode. Used by foundries, forging shops and steel plants to assess toughness and ductile-to-brittle behaviour.
Handheld meter that reads electrical conductivity of aluminium, copper and their alloys in %IACS to verify temper and heat treatment. Used in aerospace and extrusion plants.
Dual-mode pendulum machine for Izod cantilever and Charpy simply supported impact tests on steel and non-ferrous specimens. Suited to heat treatment shops and third-party metallurgical labs.
Low-load Vickers tester for case depth, thin sections, welds and small precision components. Used in aerospace, automotive and metallurgical research labs. Results are traceable to HV values with test forces from 10 gf upward.
Bench Rockwell hardness tester with load cell feedback and thermal printer for heat treated shafts, gears and bearings. Applied in automotive component plants and heat treatment QC.
Spark OES analyser that identifies grade and measures alloying elements in steel, cast iron and aluminium. Installed in foundries and incoming material inspection labs. Results come within about half a minute and are matched to grade tables.
Handheld gauge measuring remaining wall thickness of steel plates, pipes and tanks from one side. Used in maintenance, fabrication and inspection of pressure vessels. It needs access to one side only and works without cutting or draining the equipment.
Four-point rotating bending fatigue machine that generates S-N curves for steel, aluminium and alloy specimens. Used in automotive, railway and aerospace material labs. Each specimen is cycled at constant bending stress until it fractures and the count is stored.
Fog chamber for neutral salt spray, acetic acid and CASS tests on plated and painted metal parts. Employed by fastener, automotive and electroplating QC labs.
Servo-hydraulic universal testing machine for tension, compression and bend tests on steel bars, plates and fasteners. Used in foundries, rolling mills and structural steel QC labs to determine yield, UTS and elongation.
| Function | Products | What to confirm |
|---|---|---|
| Strength and fatigue | Universal Tensile Testing Machine for Metals 600 kN, Rotating Beam Fatigue Testing Machine for Metal Specimens | Capacity in kN, accuracy class under ISO 7500-1, grip sets, extensometer needs and fatigue test speed and stress ratio. |
| Impact toughness | Digital Charpy Impact Testing Machine 300 J, Izod and Charpy Combined Impact Tester for Steel | Pendulum energy, striker radius, temperature conditioning needs and the ASTM E23 or ISO 148 method. |
| Hardness | Microprocessor Rockwell Hardness Tester with Printer for Metal Parts, Micro Vickers Hardness Tester with Digital Measuring Eyepiece | Scale coverage such as HRC, HRB or HV, test force range, anvils for round parts and printer or data output. |
| Composition, conductivity and thickness | Optical Emission Spectrometer for Metal Alloy Analysis, Eddy Current Conductivity Meter for Non-Ferrous Metals, Portable Ultrasonic Thickness Gauge for Metals | Matrix elements and argon supply for the spectrometer, probe frequency of the gauge and conductivity range in percent IACS. |
| Corrosion resistance | Salt Spray Corrosion Test Chamber for Metal Components | Chamber volume, test method such as ASTM B117 or ISO 9227, spray collection and compressed air supply. |
Metal components instruments characterise material and general parts: tensile strength, toughness, hardness, composition and corrosion of castings, forgings and machined items. Fasteners instruments focus on bolts, nuts and screws, with proof load, torque tension, wedge tensile and thread gauging fixtures. A fastener maker needs both sets, because the raw wire or bar is verified with metal tests before the fastener tests.
See also: Fasteners Testing Instruments
The complete Metal Components Testing Instruments range (10 products), in alphabetical order:
Choose capacity so that your usual specimen breaks at 20 to 80 percent of the range, and check the accuracy class to ISO 7500-1. Ask for hydraulic or electromechanical drive, grip sets for round and flat specimens, extensometer and software for ISO 6892-1 or ASTM E8 reports. Plan for floor space, power and foundation needs.
Rockwell is fast and suited to heat treated parts and routine production checks on scales like HRC. Micro Vickers is slower but handles thin sections, case depth profiles and small parts at very low loads. Many labs keep both, using Rockwell on the shop floor and Vickers for investigation.
Confirm the base metals covered, such as iron, aluminium or copper, the element list and detection limits. Argon gas supply, stable power, a clean room and sample preparation grinders are required. Calibration programmes for your alloys and the ability to add standards later should be part of the quote.
Foundries and forging units, machine and tool shops, automotive and railway component makers, steel and aluminium processors, heat treatment plants, fabrication yards and third-party material testing labs. A usual metal lab begins with a hardness tester, a spectrometer and a tensile machine, and adds impact, fatigue and corrosion chambers for approvals.
A notched bar is struck by a swinging pendulum and the energy absorbed in breaking is recorded. It shows toughness of the metal and how it behaves at low temperatures, which is important for pressure parts and structural steel.
It exposes coated or plated parts to a salt fog, so corrosion appears in days rather than years. It compares coating quality and verifies that parts meet hours-to-red-rust requirements in their specification.
A round specimen rotates under a bending load, so each point on the surface sees tension and compression every revolution. Cycles to failure at different stress levels give the S-N curve for the material.
Yes. Our instruments are made in India and supplied to industries, labs and distributors across the country and for export. We provide specifications for tenders and can arrange installation and operator training on site.
A spark OES analyser in the lab gives accurate grade verification, and a portable eddy current conductivity meter gives quick sorting of non-ferrous alloys. Use the spectrometer for certificates and the handheld for incoming checks.
We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Metal Components Testing Instruments will be prepared accordingly.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.
