Medical disposables are made in huge volumes, and each batch needs documented proof of strength, leak tightness and function. Our medical product testing instruments cover the tests in the common device standards. As medical product testing instruments manufacturers in India and suppliers in India, we supply device plants, NABL-style labs and hospital supply manufacturers.
The range is grouped by device type. Syringe testers measure plunger force, hub pull-out and luer leakage, while the needle tester measures penetration force. Catheter and tubing joints are tested on a small tensile machine. Infusion sets are checked for flow rate and drip chamber behaviour. Gloves are tested for tensile and watertightness, masks for filtration and breathability. Sterile barrier pouches are peel tested, and a particle counter checks rinse solutions from devices.
A syringe plant needs the first group, a glove maker the glove tester, and a mask plant the filtration tester.
Last updated: November 2026
Tensile machine with small grips for pulling catheters, tubing joints and tips until break. Used by catheter and tubing makers to confirm joint and bond strength against minimum values.
Gravity flow tester for IV infusion sets with a height reservoir, drop counter and balance. Used by infusion set makers to confirm drop factor and flow rate delivered over time.
Gauge set for checking luer slip and luer lock dimensions and for pressure leakage of syringe and connector fittings. Used by medical device makers to verify compatibility of connectors.
Light obstruction liquid particle counter for rinse solutions of injectables and infusion devices. Used by medical device and parenteral makers to count subvisible particles at several size channels.
Tester for breathability and filtration efficiency of medical face masks, with a sample holder and pressure sensors. Used by mask manufacturers and test laboratories for release and type tests.
Tester that measures force needed for a hypodermic needle to pierce a standard rubber membrane. Used by needle manufacturers to compare bevel sharpness and lubricant coating between production batches.
Peel tester for sterilization pouches and sterile barrier packaging seals that records peak and mean peel force. Used by medical device packagers to verify that seals hold after sterilization.
Tester combining tensile testing of glove strips and a water fill leak stand for pinholes. Used by exam and surgical glove producers to verify strength, elongation and watertightness.
Tester for break-loose and glide forces of syringe plungers using a load cell and constant speed drive. Used by disposable syringe makers and prefilled syringe producers to check lubrication and fit.
Pull-out fixture and load cell for testing the bond between needle and hub of disposable syringes. Used by needle and syringe manufacturers to check that needles stay attached under load.
| Function | Products | What to confirm |
|---|---|---|
| Syringes and needles | Syringe Plunger Force Tester for Medical Syringes, Syringe and Needle Hub Pull-Out and Lock Strength Tester, Luer Taper Gauge and Syringe Leakage Test Set, Needle Penetration and Bevel Force Tester for Hypodermic Needles | Force range and resolution, fixture fit for luer slip and lock sizes, and the ISO 7886 or ISO 7864 method required. |
| Tubing, catheters and infusion | Catheter Tensile and Bond Strength Tester, Infusion Set Flow Rate and Drip Chamber Tester | Load cell size, grip type for fine tubing, height reservoir range and flow measurement accuracy. |
| Gloves and masks | Surgical Glove Tensile and Water Leak Tester, Medical Mask Bacterial Filtration and Differential Pressure Tester | Particle size and aerosol used, flow rate, pressure drop range, glove strip cutter and leak test volume. |
| Packaging and cleanliness | Sterile Barrier Package Seal Strength Tester for Medical Pouches, Medical Device Particulate Contamination Counter | Seal width, peel speed, particle size channels and rinse volume for liquid particle counting. |
Medical product instruments test devices made of plastic, rubber, metal and nonwoven, using force, leak, flow and filtration measurements. Pharmaceutical instruments test drugs, through hardness, dissolution, density and moisture. Companies making prefilled syringes, IV sets or sterile kits often need both, but the fixtures, standards and calibration needs are very different.
See also: Pharmaceutical Testing Instruments
The complete Medical Product Testing Instruments range (10 products), in alphabetical order:
Confirm that the load cell range fits break-loose and glide forces, usually under 50 N, and that the speed matches the standard, such as 100 mm per minute. Check fixtures for the syringe sizes from 1 ml to 60 ml, data output, and how the machine reports peak and average glide force.
Check test aerosol or bacterial method, such as ASTM F2101 for bacterial filtration or EN 14683 for medical face masks, along with pressure drop capability. Confirm sample holder size, flow rate control and whether the result is automatically calculated. Compliance with the method you report to customers should drive selection.
Ask for strip grips suited to pouches and peel speed settings to ASTM F88 or ISO 11607 related methods. Check load cell range, jaw width, and how well the machine supports T-peel and 180 degree configurations. Reports with graphs help in documenting each sterilisation batch.
Syringe, needle, catheter and IV set manufacturers, glove and mask producers, sterile packaging converters, contract sterilisation houses, device R&D teams and notified or accredited test labs. A first order is often a syringe force tester and leak tester, then a tensile based tester, a seal tester and a particle counter as the product list widens.
A gauge checks whether the male and female conical fittings fit within the dimensions in ISO 594 or ISO 80369 standards. Leak tests then show if the connection holds under pressure or vacuum, which matters for safe medication delivery.
It is the force needed to push the needle through a standard membrane. Lower forces mean less patient pain, so manufacturers use it to monitor sharpness, bevel grinding and lubricant coating.
Strips are pulled in a tensile tester for strength and elongation, and a water leak test checks for pinholes by filling the glove and observing leakage. Both are required in glove standards.
Yes. We manufacture the instruments in India and ship across the country and abroad. Specifications for tenders and calibration documents are available, and our team can help with installation and operator training.
Particles shed from tubing or implants can cause harm when they enter the body. A light obstruction counter measures particles in size bands after a standard rinse, and results are compared to pharmacopoeia limits.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Medical Product Testing Instruments.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.
