6mm Tapping Machine
Product code: Tapping Machine0001Buy 6mm Tapping Machine from India
6mm Tapping Machine
Production shops asking for 6mm tapping machine manufacturers in India want fast, repeatable threading without broken taps. Civil Mechanical India is among the suppliers in India of small tapping machines and larger bench, pillar and pneumatic models for volume work.
Tapping machines drive a tap into a drilled hole and reverse it out, so threads are cut straight and to depth. The 6mm machine is the light model for small holes in sheet and thin parts. Related machines in this range extend capacity: a bench machine for holes up to 12 mm, an electric hand tapper on an arm for large or awkward parts, and a pillar type floor machine for heavy parts.
A pneumatic tapper gives fast thread cutting in production, and a multi spindle head taps several holes in one stroke.
Last updated: November 2026
6mm Tapping Machine
A bench machine for tapping threads in holes up to 12 mm with a reversing spindle. Features include reversing spindle, bench mounted and adjustable depth.
A portable power tapper on an arm. Used in fabrication. Features include articulated arm, reversing and light.
A multi spindle head for tapping several holes together. Used in production. Features include multiple spindles, adjustable and gear head.
A floor tapping machine with column for tapping holes in heavy parts. Features include column, reversing and depth control.
An air operated tapper for fast thread cutting. Used in production labs. Features include air driven, lightweight and reversing.
| Function | Products | What to confirm |
|---|---|---|
| Light bench tapping | 6mm Tapping Machine, Bench Tapping Machine 12 mm | Tapping capacity in steel, spindle speed, motor rating, reversing method and table size. |
| Portable and arm tapping | Electric Hand Tapping Machine, Pneumatic Tapping Machine | Tap size range, torque, arm reach, air pressure for pneumatic type and supply voltage. |
| Heavy and multi hole tapping | Pillar Type Tapping Machine, Multi Spindle Tapping Head | Column height, number of spindles, pitch between spindles, and the drive unit needed. |
This page covers the 6mm size, meant for small holes and light work such as sheet metal parts, electrical and small fittings. The general tapping machine category covers a wider range of sizes, including larger bench and pillar models and drilling cum tapping machines. Choose the 6mm machine if your holes seldom exceed M6, because the lighter machine costs less and works faster on small taps. For anything larger, go to the wider tapping machine range.
See also: Tapping Machine Suppliers
The complete 6mm Tapping Machine range (6 products), in alphabetical order:
| 6mm Tapping Machine | Bench Tapping Machine 12 mm | Electric Hand Tapping Machine |
| Multi Spindle Tapping Head | Pillar Type Tapping Machine | Pneumatic Tapping Machine |
Confirm the largest tap size and material (mild steel, aluminium, cast iron), spindle speed and torque, and reverse mechanism. Check table or base size, power supply (230 V or 415 V), tapping chuck and collets, and coolant provision. For production, ask about depth control and tap life.
Taps break from misalignment, wrong drill size, chips jamming and excess torque. A tapping machine keeps the tap straight, applies steady torque and reverses automatically, so breakage is much lower than hand tapping. Use cutting oil and correct tap drill size for the best result.
Small manufacturing units, sheet metal and electrical fittings makers, auto component shops, ITIs, polytechnic workshops and repair garages buy tapping machines. They are commonly ordered along with pillar drills and bench vices, since drilling and tapping go together on the same job, and training institutes use them for thread cutting practice.
It is intended for taps up to about 6 mm in steel, with larger sizes possible in softer metals. Confirm capacity for your material before ordering.
It taps several holes at once at fixed spacing, which saves time on repeat jobs such as flanges and covers, and keeps hole positions consistent between parts.
Civil Mechanical India manufactures and supplies tapping machines in India with delivery to your site, and exports them. Send the model, tap size and quantity for a quotation.
Yes, it runs on compressed air, so confirm that your air line gives the required pressure and flow. An air compressor of suitable size can also be supplied.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for 6mm Tapping Machine.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.