export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Imported Radial Drilling Machines Manufacturers and Suppliers in India

Imported Radial Drilling Machines Suppliers

Quick answer: For Imported Radial Drilling Machines, Civil Mechanical India is a manufacturer and supplier in India of all geared, high precision and medium duty models. They drill large holes in heavy castings and plates. Heavy workshops, fabricators and ITIs buy them.

Heavy workshops sourcing imported radial drilling machines manufacturers in India should look at drilling capacity, arm reach and spindle speeds together. Civil Mechanical India is among the suppliers in India that lists radial drills from 40 mm to 132 mm capacity, so a fabrication shop can choose without guesswork.

In a radial drill the column carries a radial arm that swings and rises, and the drilling head slides along the arm. The workpiece stays clamped to the base or table and the spindle is brought to the hole position. This is what makes the machine suitable for large castings, fabricated frames and heavy plates.

The high precision machine lists drilling capacities of 50, 63, 80, 100 and 132 mm. The 40 mm medium duty and the 50 mm machine suit training and general work, while the 63 mm all geared drill is for heavy work. A digital readout shows depth, and a tapping attachment adds reversing for threading holes on the same set up.

Last updated: November 2026

All Geared Radial Drilling Machine 63 mm

Product code: CMI-NP-0641
Buy All Geared Radial Drilling Machine 63 mm from India

All geared head radial drill for heavy work. Used in heavy training workshops. Main ratings: capacity 63 mm, arm length 1600 mm, column 320 mm.

Radial Drilling Machine 40 mm Medium Duty

Product code: CMI-NP-0642
Buy Radial Drilling Machine 40 mm Medium Duty from India

Medium duty radial drill for work up to 40 mm. Used for workshop practice. Main ratings: capacity 40 mm, arm length 1000 mm, column 220 mm.

Radial Drilling Machine 50 mm

Product code: CMI-NP-0643
Buy Radial Drilling Machine 50 mm from India

Radial arm drilling machine with a swivelling arm and moving head for drilling large and heavy work. Used in training shops for production and set up practice.

Radial Drilling Machine With Digital Readout

Product code: CMI-NP-0644
Buy Radial Drilling Machine With Digital Readout from India

Radial drilling machine with digital depth display. Used for accuracy. Main ratings: capacity 50 mm, arm 1250 mm, motor 3 HP. Suited to engineering college, polytechnic and ITI workshop training.

Radial Drilling Machine With Tapping Attachment

Product code: CMI-NP-0645
Buy Radial Drilling Machine With Tapping Attachment from India

Radial drilling with a tapping attachment. Used for drilling and tapping in training. Main ratings: capacity 40 mm, tapping M24, arm 1250 mm. Suited to engineering college, polytechnic and ITI workshop training.

Imported Radial Drilling Machines range by function

FunctionProductsWhat to confirm
Medium dutyRadial Drilling Machine 40 mm Medium Duty, Radial Drilling Machine 50 mmDrilling capacity in steel, arm reach (spindle to column), spindle speeds and motor HP
Heavy and precisionAll Geared Radial Drilling Machine 63 mm, High Precision Radial Drilling MachineCapacity (63 to 132 mm), geared head type, arm travel, base plate size and weight
Added functionsRadial Drilling Machine With Digital Readout, Radial Drilling Machine With Tapping AttachmentDigital depth resolution, tapping range, reversing mechanism and attachment fitting

How is this different from the All Geared Radial Drilling Machine?

An all geared radial drill is one type: its head uses gears for speed and feed changes instead of belts and cones. This imported radial page is wider and includes medium duty, high precision, digital readout and tapping models along with geared ones. If the job is heavy continuous drilling, the all geared machine stands out; this page helps compare different capacities.

See also: All Geared Radial Drilling Machine Suppliers

Full Imported Radial Drilling Machines product list

The complete Imported Radial Drilling Machines range (6 products), in alphabetical order:

Specifications and standards

What should I check about reach and capacity?

Measure the largest workpiece and the farthest hole position from the column. The distance between spindle axis and column, in maximum and minimum, decides what the arm can reach. Capacity listed for steel, such as 50 or 63 mm, falls for harder materials.

Do I need digital readout or tapping attachment?

A digital readout helps with repeated depths and teaches accuracy. A tapping attachment lets the same machine drill and tap in one set up, which saves time on tapped holes. Both options should be confirmed when ordering. The tapping attachment is helpful in a training workshop because students can drill a hole and then tap its thread in the same clamping.

What foundation and installation details matter?

Radial drills are heavy and tall, with a base plate that needs to be levelled and bolted down. Ask for the foundation drawing, total weight and overall height, since roof clearance and floor loading matter. The arm clamping system and column lock should be checked on trial, since a loose arm gives off-position holes in heavy drilling.

Who buys Imported Radial Drilling Machines?

Heavy fabrication units, machine builders, railway and automobile workshops, and polytechnic and engineering college machine shops buy radial drills. Institutes usually buy one medium duty machine and add a precision model when advanced machining is taught. Railway and defence workshops also use them for drilling large frames, brackets and housings that cannot be carried to a pillar drill.

Related ranges

Frequently asked questions

What is the advantage of a radial drill over a pillar drill?

The arm and head move to the hole, so heavy parts do not need to be shifted. A pillar drill needs the work moved under a fixed spindle.

Which Morse taper do these machines use?

Taper size depends on capacity, commonly MT 4 or MT 5 for mid sizes and larger for 100 mm. Ask for the taper in the quotation.

How many spindle speeds are available?

Geared heads usually offer 12 to 16 speeds. Confirm speed range for your drill sizes. A wide speed range lets you use both small drills at high speed and large drills at low speed, and the chart is given on the machine.

Is imported pattern the same as imported machine?

This indicates a design pattern. We can describe the build and bearings in the specification. We state the main castings, gear material and spindle bearings so you can compare the machine with other offers on a like-for-like basis.

Can machines be supplied against a tender?

Yes, with a technical specification sheet. Send your tender. Government tenders for radial drills usually need a full technical sheet, delivery schedule and commissioning terms, which we include in the quotation.

Tender enquiries

Request a tender quotation

Civil Mechanical India is an established manufacturer and supplier for tender requirements from India, handling civil laboratory and industrial testing tenders and bulk and OEM orders for mechanical engineering and testing laboratory equipment. On receipt of your tender specifications, we will submit a complete quotation for Imported Radial Drilling Machines.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.