Semi Hydraulic Hacksaw Machine
Product code: Hacksaw Machine0001Buy Semi Hydraulic Hacksaw Machine from India
Semi Hydraulic Hacksaw Machine
A buyer comparing hacksaw machine manufacturers in India should look at the cutting capacity in round and square bar and at strokes per minute, since both decide how fast a bar is parted. Civil Mechanical India is one of the suppliers in India that lists these figures for each model, from a bench saw to a hydraulic feed saw.
The reciprocating hacksaw cuts only on the forward stroke, lifts the blade on return and feeds under gravity or hydraulic control. The semi hydraulic model cuts round bar of about 165 mm and square of 150 mm at 65 strokes per minute, while the hydraulic model goes to 200, 250 and 300 mm round with 150 to 250 mm square. A bench hacksaw handles small bars in a school shop, and the mitre model has a swivelling vice for angled cuts on tube and sections.
The automatic machine adds automatic feed and shut-off after the cut so one operator can mind several jobs, and the power hacksaw with coolant keeps the blade cool on steel bars.
Last updated: November 2026
Semi Hydraulic Hacksaw Machine
Hydraulic Hacksaw Machine
Hacksaw machine with automatic feed and automatic shut off after the cut. Used for repeated cutting of bars in production training. Main ratings: capacity 200 mm round, stroke 150 mm, motor 1.5 HP, 415 V AC.
Light bench mounted power hacksaw for cutting small bars in school workshops. Gives students safe practice in machine sawing. Main ratings: capacity 75 mm, stroke 100 mm, motor 0.5 HP, 230 V AC.
Power hacksaw whose vice swivels for angled cuts in tubes and sections. Used in fabrication labs. Main ratings: capacity 100 mm, swivel Plus/minus 45 deg, motor 1 HP, 415 V AC.
Reciprocating power hacksaw with a swivel vice and coolant pump for cutting steel bars and sections. Used for stock cutting in workshops. Main ratings: capacity 150 x 150 mm, stroke 150 mm, motor 1 HP, 415 V AC.
| Function | Products | What to confirm |
|---|---|---|
| Light and training use | Bench Hacksaw Machine, Mitre Hacksaw Machine | Cutting capacity in round bar, vice swivel angle, blade length and motor HP |
| Semi hydraulic and hydraulic feed | Semi Hydraulic Hacksaw Machine, Hydraulic Hacksaw Machine | Round and square cutting capacity, strokes per minute, feed control and hydraulic pump size |
| Automatic cutting | Automatic Hacksaw Machine, Power Hacksaw Machine With Coolant | Automatic stop mechanism, coolant tank capacity and pump, vice type and stock support |
A hacksaw machine moves a straight blade back and forth and cuts only on one stroke, so it is simple, cheap to run and easy to understand for students. A horizontal bandsaw uses a continuous loop blade, cuts faster, leaves a squarer face and handles larger sections. Buy the hacksaw for training and occasional cutting, and the bandsaw where the same bar is cut all day.
See also: Horizontal Bandsaw Suppliers
The complete Hacksaw Machine range (6 products), in alphabetical order:
| Automatic Hacksaw Machine | Bench Hacksaw Machine | Hydraulic Hacksaw Machine |
| Mitre Hacksaw Machine | Power Hacksaw Machine With Coolant | Semi Hydraulic Hacksaw Machine |
Choose by the largest bar you will cut, not the average. Capacities are given for round and square bar separately, and rectangular or angle sections cut at less. A 165 mm round capacity is adequate for most workshop bar, while structural fabrication may need the 250 or 300 mm hydraulic model.
Ask for the blade length and pitch supplied, for example coarse teeth for mild steel and finer for tube, and whether a coolant pump with tank is part of the supply. Cutting without coolant wears blades quickly on alloy steel.
See that the blade guard, an emergency stop and a vice with positive clamping are fitted. The machine should lift the blade on the return stroke automatically and switch off at the end of cut where an automatic unit is chosen.
Orders come from ITIs and polytechnic fitting and machine shops, school workshops, fabrication shops, and engineering colleges setting up a basic metal-cutting bay. A hacksaw is often one of the first machines bought for a new workshop, followed by a drilling machine, bench grinder and lathe.
The semi hydraulic model is listed at about 65 strokes per minute. Other models differ, so give us the material and bar size and we confirm the speed.
Yes, the vice swivels so tubes and sections can be cut at an angle, commonly up to 45 degrees. Confirm the angle range you need.
In the semi hydraulic type the frame is lifted by a hydraulic cylinder but the cutting feed is gravity or weight based. In the hydraulic machine the feed pressure is controlled, which suits harder or larger stock.
Yes, with the blade, coolant system and manual crated for export. Please share the destination port and local voltage. Hydraulic and automatic models weigh several hundred kilograms, so the crate size and weight are shared with your forwarder in advance for planning port handling.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Hacksaw Machine.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.