Horizontal Bandsaw
Product code: Horizontal0001Buy Horizontal Bandsaw from India
Horizontal Bandsaw
Workshops comparing horizontal bandsaw manufacturers in India should look at cutting capacity, blade speed and the vice system. Civil Mechanical India is one of the suppliers in India that offers saws of 250 mm and 350 mm capacity along with mitre, semi-automatic and portable variants.
A horizontal bandsaw drops a bandsaw blade through a bar held in a vice, using gravity or a hydraulic cylinder to control the feed. The cut is square and clean and the kerf is narrow, so material loss is small. The standard 250 mm machine has a swivel vice and coolant system, which allows angled cuts and keeps the blade cool.
The heavy duty 350 mm model cuts thick bars and sections in production training labs and fabrication shops. The mitre bandsaw has a head that swivels up to 45 degrees, the semi-automatic machine uses a hydraulic vice with automatic return and shut-off, and the portable saw on a folding stand suits pipes and bars on site.
Last updated: November 2026
Horizontal Bandsaw
Large horizontal bandsaw for cutting heavy bars and sections. Used in production training labs and fabrication shops. Main ratings: capacity 350 mm, blade 4300 x 34 mm, motor 3 HP, 415 V AC.
Horizontal metal cutting bandsaw with swivel vice and coolant system. Used in workshops for cutting bars and tubes accurately. Main ratings: capacity 250 mm round, blade 3400 x 27 mm, motor 1.5 HP, 415 V AC.
Horizontal bandsaw whose head swivels for mitre cuts up to 45 deg. Used for angled cutting of tubes and sections. Main ratings: capacity 200 mm, mitre 0 to 45 deg, blade 2750 x 27 mm.
Hand held portable bandsaw with a folding stand for cutting pipes and bars. Used in civil and fabrication labs. Main ratings: capacity 115 mm, blade 1140 x 13 mm, power 1100 W, 230 V AC.
Bandsaw with hydraulic vice and automatic return and shut off at the end of cut. Used in training for production cutting of bars and sections.
| Function | Products | What to confirm |
|---|---|---|
| Standard cutting | Horizontal Bandsaw 250 mm, Heavy Duty Horizontal Bandsaw 350 mm | Cutting capacity in round and rectangular, blade size, blade speeds and coolant tank |
| Angled cutting | Mitre Horizontal Bandsaw | Swivel range (up to 45 degrees), vice clamping and capacity at the angle |
| Automatic and site use | Semi Automatic Horizontal Bandsaw, Portable Horizontal Bandsaw | Hydraulic vice and feed control, auto stop, weight and stand of the portable saw |
The general Bandsaw Machine category includes vertical bandsaws for contour cutting of wood and metal. A horizontal bandsaw is only for straight cutting of bars, tubes and sections, with the blade running horizontally and the work held still. If the job is to cut stock to length in a workshop, choose here, and if it is to cut curves choose a vertical saw.
See also: Bandsaw Machine Suppliers
The complete Horizontal Bandsaw range (6 products), in alphabetical order:
| Heavy Duty Horizontal Bandsaw 350 mm | Horizontal Bandsaw | Horizontal Bandsaw 250 mm |
| Mitre Horizontal Bandsaw | Portable Horizontal Bandsaw | Semi Automatic Horizontal Bandsaw |
Check the largest round bar and the largest rectangular section you will cut. A 250 mm saw is a good fit for most workshop stock and a 350 mm saw suits heavy bars. Capacity falls when the vice is swivelled, so check the mitre figure separately.
Ask for blade length and width, the number of blade speeds and the tooth pitch used for solid bar versus tube. A bimetal blade lasts longer on alloy steel than a carbon blade. Coolant flow matters as much as speed.
Look for blade guards, a cut-off switch at the end of travel, a clamp that holds the work firmly and an emergency stop. The semi-automatic type with hydraulic vice is helpful for repeat training exercises. The mitre saw and the semi-automatic saw also need the vice to be checked for squareness, which should be shown in a first trial cut.
Common buyers are fabrication units cutting structural bars, auto and machine shops, mechanical college labs, vocational centres and tool rooms. A horizontal bandsaw is typically ordered together with a drilling machine and a lathe so that stock cut to length can go straight into machining practice.
Usually yes, since the blade cuts continuously, and the cut face is cleaner. The cost is higher, and the blade is more expensive than a hacksaw blade.
Yes, it is hand-held with a folding stand, and it is useful for pipe and bar cutting where moving the work is not practical. For pipes on site, a stand holds the saw steady, and fresh blades should be kept in hand because pipe walls vary and teeth wear fast.
By a tension handle or screw, and correct tension prevents the blade wandering. Your training manual should explain the procedure. Too slack and the blade twists and cuts crooked, too tight and it breaks, so students should learn the correct feel with a tension gauge.
It normally needs a 415 V three phase supply. Confirm your connected load before ordering. The motor and hydraulic pump together draw more current than the light models, so an adequate cable and a starter are recommended.
We can arrange commissioning guidance at your site. Provide your location and floor details. Commissioning includes levelling, checking blade alignment and a trial cut with your own bar stock, within the area we cover in India.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Horizontal Bandsaw.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.