export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Hydraulic Shearing Manufacturers and Suppliers in India

Hydraulic Shearing Suppliers

Quick answer: Hydraulic shearing machines cut sheet and plate cleanly with a hydraulic guillotine blade. The range includes 1250 mm and 2500 mm guillotine shears, a swing beam shear for plate up to 8 mm, a shear with light marker and a combined bar and angle shear. Civil Mechanical India manufactures each shear listed and supplies it within India.

Metal fabricators and training shops looking for hydraulic shearing manufacturers in India should first note the plate thickness and length they cut. Civil Mechanical India is among the suppliers in India that lists shears from 1250 to 2500 mm cutting length, plus swing beam and bar and angle models.

Shearing cuts stock without forming chips: an upper blade descends against a fixed lower blade and the metal parts along the gap between them. In a hydraulic machine the blade is driven by cylinders, so cutting force is smooth and adjustable. The 1250 mm shear is a compact lab machine, and the 2500 mm guillotine shear cuts steel plate in a fabrication shop.

The swing beam shear has a beam that pivots to cut, which suits plate up to about 8 mm with a cutting length of 2000 mm. A light line marker shows the cutting line on the sheet, and the bar and angle shear cuts round bar up to 30 mm, angle and flat in a fabrication lab.

Last updated: November 2026

Hydraulic Bar And Angle Shearing Machine

Product code: CMI-NP-0631
Buy Hydraulic Bar And Angle Shearing Machine from India

Combined shear for bar, angle and flat. Used in fabrication labs. Main ratings: round bar Up to 30 mm, angle 100 x 100 x 10 mm, flat 150 x 12 mm.

Hydraulic Shearing Machine 1250 mm

Product code: CMI-NP-0632
Buy Hydraulic Shearing Machine 1250 mm from India

Smaller hydraulic shear for lab use. Used in training for sheet cutting. Main ratings: cutting length 1250 mm, thickness Up to 4 mm, motor 3 HP, 415 V AC.

Hydraulic Shearing Machine 2500 mm

Product code: CMI-NP-0633
Buy Hydraulic Shearing Machine 2500 mm from India

Hydraulic guillotine shear for cutting steel plate. Used in fabrication shops to cut plate accurately. Main ratings: cutting length 2500 mm, thickness Up to 6 mm, motor 7.5 HP, 415 V AC.

Hydraulic Swing Beam Shearing Machine

Product code: CMI-NP-0635
Buy Hydraulic Swing Beam Shearing Machine from India

Shear with swing beam blade. Used for plate up to 8 mm. Main ratings: cutting length 2000 mm, thickness Up to 8 mm, motor 7.5 HP.

Hydraulic Shearing range by function

FunctionProductsWhat to confirm
Guillotine shearingHydraulic Shearing Machine 1250 mm, Hydraulic Shearing Machine 2500 mm, Hydraulic ShearingCutting length, plate thickness, blade gap setting, back gauge range and hold-down
Swing beam shearsHydraulic Swing Beam Shearing Machine, Hydraulic Shearing Machine With Light MarkerMaximum thickness (about 8 mm on swing beam), cutting length, light line marker and rake angle
Bar and angleHydraulic Bar And Angle Shearing MachineRound bar capacity (up to 30 mm), angle size, flat bar size and blade types

How is this different from the Over Crank Mechanical Shearing Machine?

An over crank mechanical shear uses a flywheel and crank to drive the blade, so it is fast but does not allow stroke to be stopped midway. A hydraulic shear drives the blade by a hydraulic cylinder, which gives smooth force and easier control of blade gap and stroke. Mechanical shears suit repetitive thin sheet work, and hydraulic shears suit thicker plate and lab use.

See also: Over Crank Mechanical Shearing Machine Suppliers

Full Hydraulic Shearing product list

The complete Hydraulic Shearing range (6 products), in alphabetical order:

Specifications and standards

How do I define cutting capacity correctly?

State plate thickness and length, and the material, because capacity falls for stainless or high tensile steel. A shear rated for 6 mm mild steel will not cut 6 mm stainless. Ask for capacity figures in both mild steel and stainless.

What blade and gap points should I verify?

The gap between blades must be set to about a tenth of plate thickness. Ask for blade material, number of cutting edges (four edge blades can be turned), and how the gap is adjusted. Dull or wide-gap blades leave burrs and rollover.

What safety guarding is needed?

A front finger guard, a foot pedal with an emergency stop and a hold-down that clamps the plate before the blade descends. Training labs should ask for a back gauge with a clear scale. Blade guarding on the sides and rear matters in training labs, as students may walk around the machine while another operates it.

Who buys Hydraulic Shearing?

Orders come from sheet metal and structural fabricators, panel makers, vocational centres, polytechnics and engineering colleges. A shear is usually bought together with a press brake and a bending roller to create a full sheet metal bay. Technical institutes also take the 1250 mm model for plate cutting practice before students move on to larger guillotines.

Related ranges

Frequently asked questions

What is the light marker used for?

It projects a thin line of light along the blade so the operator can align the cut without trial cuts, saving plate. The marker is useful in teaching, since students can see exactly where the blade will fall, and it reduces scrap in costly plate.

Can the swing beam shear cut thick plate?

Thickness is limited to about 8 mm on this model. Heavier plate needs a guillotine of higher tonnage. Swing beam shears also bend the plate slightly as it is cut, which should be allowed for in precision work.

How often should blades be sharpened?

Depends on use, but a four edge blade can be rotated to a fresh edge several times before regrinding. With two cutting edges on each side, a four edge blade can last through many hundreds of sheets before it needs a regrind.

What power supply is needed?

Hydraulic shears normally use a 415 V three phase motor, and the rating rises with cutting length. The pump motor sits on top or beside the frame, so three phase at 415 V is normally needed, and the starter is supplied with the machine.

Can shears be delivered under tenders?

Yes, with datasheets and drawings. Share the tender details. Hydraulic shears are often bought by technical institutes through tenders, so we supply drawings, catalogue sheets and a compliance statement against your specification.

Tender enquiries

Request a tender quotation

As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Hydraulic Shearing.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.