Hydraulic Shearing

Hydraulic Shearing

Specification

The Hydraulic shearing machine is used for cutting stock without the formation of chips. The machinery is built up of a rigid steel frame that is designed to avoid weak sections at load support. The welded together steel plates of the frame of the table whose top surface is manufactured to facilitate front gauge stopper. The roller guide is guided by three point roller. The cylinder of the hydraulic machine is precisely honed and fitted with the hard piston rod. Both the cylinders function on different pressure principles. In order to avoid the slipping of the sheet, hydraulic hold pads are held securely. The blade clearance is manual and can be adjusted easily by a lever on each side of the machine.
Accessories of Hydraulic Shearing Machine

    Blade clearance arrangement
    Blades
    Instruction and maintenance manual
    Control panel
    Operational console
    Variable rake angle
    Stroke adjusting rod
    Electronic stroke counter
    Manual back gauge
    Front scale gauge
    Electrical motor
    T-slot front supporters

Benefits of Hydraulic Shearing Machinery

    User Friendly
    Easy to maintain
    Low tool cost
    Enormous versatility
    Quick and easy settings
    Low initial cost

Shearing	Shearing Thickness				Rake	Rake	Stroke /min	Hold	H.P
Rake Angle				Angle	Angle	at	Downs
S.S		Range	min/max
Max	Nomi	Max	Rake Angle
2500	3.15	4	2	3	1°15'	0.5-2°	28-13	13	5
3000	3.15	4	2	3	1°15'	0.5-2°	24-9	16	5
1500	4	6	3	4	1°37'	0.5-3°	30-15	8	5
2000	4	6	3	4	1°37'	0.5-3°	28-13	11	7.5
2500	4	6	3	4	1°37'	0.5-3°	26-8	13	7.5
3000	4	6	3	4	1°37'	0.5-3°	24-6	16	10
1500	6	8	4	6	1°45'	0.5-3°	24-8	8	10
2000	6	8	4	6	1°45'	0.5-3°	22-7	11	10
2500	6	8	4	6	1°45'	0.5-3°	28-8	13	15
3000	6	8	4	6	1°45'	0.5-3°	24-6	16	15
1500	8	10	6	8	2°	0.5-3°	22-10	8	15
2000	8	10	6	8	2°	0.5-3°	18-8	11	15
2500	8	10	6	8	2°	0.5-3°	24-8	13	20
3000	8	10	6	8	2°	0.5-3°	20-6	16	20
2000	10	13	8	10	2°	0.5-3°	18-8	11	25
2500	10	13	8	10	2°	0.5-3°	24-8	13	20