Tapping And Threading Machine
Product code: Tapping0001Buy Tapping And Threading Machine from India
Tapping And Threading Machine
Civil Mechanical India is among the Tapping And Threading Machine manufacturers in India, covering both tapping and die threading equipment. For tapping and threading machine suppliers in India, tell us the thread sizes, the material and whether you work on bolts or pipes and we will quote.
Tapping makes a thread inside a hole with a tap, while threading cuts an external thread with a die or chasers. Our six items cover a bench tapping machine with a swing arm, a bolt and rod threading machine, a lead screw bolt threader for longer accurate threads, a hand die stock set for pipes and bolts and a portable electric pipe threader.
Thread size range, tap or die holder type and speed matter. Pipe threading is usually BSP or NPT form, while bolts are metric or Whitworth, so the thread form must be stated at the outset.
Last updated: November 2026
Tapping And Threading Machine
Bench Tapping Machine with Arm is a bench tapping machine with a balanced swing arm, designed for tapping threaded holes in workpieces with reversing action.
Bolt and Rod Threading Machine is a machine with die head for cutting external threads on bolts and rods, designed for producing threaded rods and bolts up to 25 mm.
Bench bolt threading machine with a lead screw drive and quick-opening die head, used for cutting accurate external threads on bolts, studs and rods in workshops and training institutes.
Pipe and Bolt Die Stock Set is a hand operated die stock and die set for cutting external threads, designed for manual threading of rods, bolts and small pipes.
Portable Electric Pipe Threader is a hand carried electric pipe threading drive with interchangeable die heads, designed for threading and cutting pipes on site up to 2 inch.
| Function | Products | What to confirm |
|---|---|---|
| Internal threading | Bench Tapping Machine with Arm | Tap size range, arm reach, spindle speed, motor kW and reverse arrangement |
| External threading on bolts and rods | Bolt and Rod Threading Machine, Lead Screw Bolt Threading Machine | Diameter range, thread pitch, die head type, speed and cooling |
| Pipe and hand threading | Portable Electric Pipe Threader, Pipe and Bolt Die Stock Set | Pipe size range, die sets, drive power and kit contents |
A 6 mm tapping machine is a bench unit sized to cut internal threads up to about M6 in drilled holes, usually driven by a small motor with a reversing clutch. The tapping and threading group is broader: it includes external threaders for bolts and pipes as well as tapping heads. If the job is only small internal threads, the 6 mm tapper is enough; if bolts, rods or pipe ends must be threaded too, choose from this wider group.
See also: 6mm Tapping Machine Suppliers
The complete Tapping And Threading Machine range (6 products), in alphabetical order:
| Bench Tapping Machine with Arm | Bolt and Rod Threading Machine | Lead Screw Bolt Threading Machine |
| Pipe and Bolt Die Stock Set | Portable Electric Pipe Threader | Tapping And Threading Machine |
State the thread form (BSP, NPT, metric or Whitworth), the diameter range and the material. Check the machine's rated pipe or bolt capacity, the die head or chaser type, the speed and the motor. For a lead screw machine, ask about thread length and pitch accuracy. Also confirm coolant or oil supply.
A portable electric threader goes to the pipe on a site, saving the cost of moving long lengths. A bench threader gives steadier, more repeatable threads on bolts and short rods in a shop. Pick by where most of the work is done and the pipe size.
Plumbing and pipe fitting contractors, fastener and bolt makers, general engineering shops, polytechnics and ITI fitter and machinist trades buy these machines. Typical orders combine a tapping arm, a die stock set and a drilling machine for a hole making and threading station. Maintenance departments keep a portable pipe threader for site repairs.
Mild steel, brass, aluminium and cast iron are commonly threaded, while stainless needs slower speed and good cutting oil. Hard alloys need special taps and dies. Mention the material.
Hand die stock sets cover pipe or bolt sizes in a graduated range, often from 1/2 inch to 2 inch pipe or M6 to M24 bolts. The set includes dies and a ratchet handle. Say what sizes you need.
Oil cools the die or tap, flushes chips and gives a smooth thread surface. Without it threads tear and tools wear quickly. A recirculating oil system is found on larger machines.
Yes, we ship tapping and threading machines from India and also serve domestic customers. Machines are boxed with dies and accessories listed. Share the quantity and destination for a packing note.
We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Tapping And Threading Machine will be prepared accordingly.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.