Magnetic Drill Stand
Product code: Magnetic Drill0001Buy Magnetic Drill Stand from India
Magnetic Drill Stand
Steel fabricators and site teams who look for magnetic drill stand manufacturers in India want to drill structural steel where a pillar drill cannot go. Civil Mechanical India is one of the suppliers in India that lists portable, annular cutter, swivel base, cordless and training magnetic drills, so site and lab needs are covered.
The key part is an electromagnetic base that holds the unit to a steel surface with a pull of several hundred kilograms. A motor and feed handle are carried on a column, and the cutter is fed down by a rack and pinion. Annular cutters cut a ring and leave a slug, so they drill big holes with lower power than twist drills.
The portable model and stand are used for beams, plates and tank walls. The swivel base stand adjusts the angle on curved or sloping surfaces, the cordless version works where mains power is not available, and the training press unit has a safety guard and a stand for demonstration in lab classes.
Last updated: November 2026
Magnetic Drill Stand
Annular Cutter Magnetic Drill Machine is a magnetic base drilling machine fitted for core-type annular cutters of 12 to 50 mm, designed for fast clean hole cutting in mild steel plates and structural sections.
Cordless Magnetic Drill Machine is a battery-powered magnetic drilling machine for work where mains supply is not available, designed for drilling holes in steel structures, bridges and towers at remote sites.
Magnetic Drill Press Training Unit is a training-grade magnetic drill press with safety guard and demonstration panel, designed for teaching safe drilling practice, magnetic clamping and cutter selection to students.
Magnetic Drill Stand with Swivel Base is a magnetic drill stand with a swivelling base that allows drilling on angled and inclined steel surfaces, designed for holding hand drills precisely for angled hole drilling on steel members.
Portable Magnetic Drilling Machine is a portable electromagnetic-base drilling machine that clamps to steel sections and drills holes up to 32 mm, designed for drilling structural steel, beams and plates on site or in the workshop.
| Function | Products | What to confirm |
|---|---|---|
| Portable magnetic drills | Portable Magnetic Drilling Machine, Magnetic Drill Stand | Magnet holding force, motor watts, spindle taper, drilling capacity and stroke |
| Cutter based machines | Annular Cutter Magnetic Drill Machine, Magnetic Drill Stand with Swivel Base | Annular cutter diameter range and depth, swivel angle and coolant feed arrangement |
| Cordless and training | Cordless Magnetic Drill Machine, Magnetic Drill Press Training Unit | Battery capacity, hole size capacity, safety guard and demonstration stand details |
Heavy Duty Drill covers a wide set of machines, including core rigs and pillar drills. A magnetic drill stand is a particular tool: it clings to steel with a magnet so that the drill goes to the work. It is the right choice for steel structures and plates that cannot be brought to a drill press, but it cannot work on non-magnetic metals like aluminium or on thin or rusty plate.
See also: Heavy Duty Drill Suppliers
The complete Magnetic Drill Stand range (6 products), in alphabetical order:
| Annular Cutter Magnetic Drill Machine | Cordless Magnetic Drill Machine | Magnetic Drill Press Training Unit |
| Magnetic Drill Stand | Magnetic Drill Stand with Swivel Base | Portable Magnetic Drilling Machine |
Magnet force depends on plate thickness, surface and cleanliness. Thin plate or paint reduces grip. Ask for the holding force on a given plate thickness and whether a safety chain is supplied. Never use on a material with a gap beneath the unit.
Annular cutters are better above about 14 mm, as they cut only the edge of the hole, use less power and finish faster. Twist drills suit smaller holes. Ask the cutter range your machine accepts and what shank and pilot pins are included.
Fit a safety guard, an overload and low-magnet cutout and a chain for overhead work. Coolant feeding into the cutter reduces heat and extends life. Train students to switch the magnet on before the motor. Add a check that the unit will not start if the magnet is off or the plate is too thin, which is an important safety interlock.
Structural steel fabricators, bridge and tower builders, shipyards, boiler and pressure vessel units, plant maintenance teams and vocational centres teaching steel work buy these units. The training press is used in polytechnic fabrication labs. Wind tower and crane makers also use them for drilling large plates and flanges that cannot be lifted onto a drill press.
No, the magnet needs ferrous steel. For aluminium use a clamp or vacuum base. Work in aluminium or other non-ferrous metals needs a different drill with a fixture, since there is nothing for the magnet to grip.
Paint and rust reduce grip, so clean the contact area first. A wire brush or grinder pass over the contact patch gives the best grip, and thin, bowed or oily plate may need extra clamping.
It is used on site where no mains is available, with a battery powering the magnet and motor. Cordless units help when a crew works at height or in the field, but the battery limits the number of large holes between charges.
Typical depth is 25 to 50 mm. State the plate thickness. Cutter depth depends on the cutter length and the stroke of the column, so mention the thickest plate you need to drill through.
Yes, they are compact and easily packed. Give voltage and destination. The units are compact and each weighs only a few tens of kilograms, so air shipment is practical, and we add spare cutters if wanted.
Civil Mechanical India is one of the leading manufacturers and suppliers in India for tender requirements, covering civil laboratory and industrial testing tenders and the bulk and OEM supply of mechanical engineering and testing laboratory equipment. Kindly share your tender specifications and we shall submit a complete quotation for Magnetic Drill Stand.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.