Heavy Duty Drill
Product code: Heavy Duty Drill0001Buy Heavy Duty Drill from India
Heavy Duty Drill
Heavy duty drill manufacturers in India are often asked for machines that bore into both concrete and steel, so the choice is split by material. Civil Mechanical India is one of the suppliers in India that lists core drills for concrete, magnetic drills for plate and pillar drills for training workshops in one range.
The core drilling machine is mounted on a rig and uses a diamond bit to cut cylindrical cores from concrete, which are then tested for compressive strength in a concrete lab. The rotary hammer drill with SDS chuck drills anchor holes in concrete, brick and stone. For steel the magnetic drill holds itself to the plate through an electromagnetic base and cuts holes with annular cutters.
The 32 mm electric drill is a hand tool with a geared chuck and side handle, and the 32 mm pillar drill is a floor standing machine with a geared head used in training workshops. The thing that separates these machines is not just size but motor power, chuck type and what they can safely bore.
Last updated: November 2026
Heavy Duty Drill
Rig mounted core drill with diamond bit for cutting concrete cores for compressive test. Used in concrete labs to take samples. Main ratings: core diameter 50 to 150 mm, motor 2000 W, 230 V AC, speed 3 steps.
Heavy duty hand held electric drill with a geared chuck and side handle for drilling steel and masonry. Used in workshops and civil labs for large diameter holes.
Portable drilling machine with an electromagnetic base that clamps to steel plate for annular cutter drilling. Used in fabrication training to drill large holes in structural steel.
Floor standing pillar drill with geared head for drilling up to 32 mm in steel. Used in training workshops for heavy drilling practice. Main ratings: capacity 32 mm, motor 2 HP, 415 V AC, spindle taper MT3.
Hammer drill with SDS chuck for drilling concrete, brick and stone. Used in civil workshops for anchor holes and core samples. Main ratings: capacity 38 mm concrete, power 1500 W, 230 V AC, impact energy 8 J.
| Function | Products | What to confirm |
|---|---|---|
| Concrete and masonry drilling | Heavy Duty Core Drilling Machine, Heavy Duty Rotary Hammer Drill | Core bit diameter range, motor kW, SDS chuck type, water feed for coring and rig stand stability |
| Steel drilling | Heavy Duty Magnetic Drill Machine, Heavy Duty Electric Drill 32 mm | Annular cutter capacity, magnet holding force, morse taper or chuck, motor wattage and speed |
| Floor standing | Heavy Duty Pillar Drilling Machine 32 mm | Drilling capacity in steel, table size, spindle speeds, morse taper and motor HP |
Light Duty Drill is made for thin sheet, wood and plastic, with chucks of 10 to 13 mm and small motors. Heavy duty drills use larger motors, geared chucks or Morse taper spindles and rigid bases, so they can bore 32 mm holes in steel or cut concrete cores. If students only drill sheet and timber, the light range is enough; for plate, masonry and structural work choose here.
See also: Light Duty Drill Suppliers
The complete Heavy Duty Drill range (6 products), in alphabetical order:
| Heavy Duty Core Drilling Machine | Heavy Duty Drill | Heavy Duty Electric Drill 32 mm |
| Heavy Duty Magnetic Drill Machine | Heavy Duty Pillar Drilling Machine 32 mm | Heavy Duty Rotary Hammer Drill |
Look at the material and the hole. Concrete cores for testing need a core rig with water cooling, and anchor holes need a rotary hammer. Holes in steel beams and plates on a site where the work cannot be moved are best done by a magnetic drill with an annular cutter. Mention hole diameter and depth.
Heavy models draw high current, so note the motor rating in watts or kW and whether supply is 230 V single phase or 415 V three phase. A core drilling rig on a weak supply can trip the line. Ask also for a spare set of carbon brushes, because heavy duty motors wear brushes faster in daily classroom or site use.
Ask for the side handle, depth stop, chuck key or SDS bits, the coolant arrangement for coring and the guard on the pillar drill. For magnetic drills, a safety strap should be supplied. For coring, a water swivel and a clamp to the slab are what keep the bit from jamming, so check they are in the supply scope.
Orders come from construction material labs that cut cores from slabs, civil contractors, fabrication shops drilling plate, polytechnic workshops and engineering colleges. A concrete testing lab often adds the core drill along with a compression testing machine to test core samples taken from site.
The size depends on the bit and the motor. Commonly 75 to 150 mm bits are used for compressive strength cores. State your needs. Cores for compressive tests are usually matched to the aggregate size, for example a 100 mm core for 20 mm aggregate concrete in a lab.
Yes, rust, scale and uneven plate reduce holding force, so the surface should be cleaned before drilling. The strongest hold is on thick, flat, mill-scale-free steel, and a thin or curved section may need clamping or a safety chain as well.
A chuck on rotary hammer drills that lets bits slide to give a hammering action. Bits must be SDS type. The SDS system also lets bits be changed quickly without a key, which saves time when drilling many anchor holes on site.
The capacity is given for mild steel, and harder steel reduces the practical size. For stainless steel or alloy steel, expect lower speeds and a smaller practical hole, and use cutting oil to protect the bit and finish.
Yes, with the specification sheet and sample drawings needed for a tender. Share the tender number and scope. Where a lab tender lists a core drill with its cutting bits and stand, we can quote them together with the accessories required.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Heavy Duty Drill.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.