Hydraulic Press Brake
Product code: Press Brake0001Buy Hydraulic Press Brake from India
Hydraulic Press Brake
Sheet-metal shops that compare hydraulic press brake manufacturers in India need tonnage and bending length figures before price. Civil Mechanical India is one of the suppliers in India that lists 40 tonne and 63 tonne machines with digital angle options, so the machine can be matched to the thickness and length of sheet.
A hydraulic press brake has a rigid bed and a moving ram. The sheet is placed over a vee die on the bed and the punch descends to the programmed depth, forming the bend. Because the ram is hydraulic, force is available along the full stroke and the same machine can make light and heavy bends. The listed 40 tonne and 63 tonne models handle thicker sheet than the bench brakes.
The digital angle control model shows the ram position and repeats bend angles accurately, which is useful for training in precision bending. The hand operated brake and the bench pneumatic brake are for light gauge sheet in school workshops, where the bending length is about 600 to 1000 mm.
Last updated: November 2026
Hydraulic Press Brake
Manual bending brake for light gauge sheet. Used in school workshops for simple folds. Main ratings: bending length 1000 mm, thickness Up to 1.2 mm MS, operation Hand lever.
Hydraulic press brake that bends sheet metal using a punch and vee die. Used in sheet metal workshops to teach bending to angle and radius.
Press brake for thicker sheet bending. Used in fabrication training for heavier gauge parts. Main ratings: capacity 63 tonne, bending length 2000 mm, throat 250 mm.
Press brake with digital angle display for accurate bending. Used to train in precision bending. Main ratings: capacity 40 tonne, length 1600 mm, motor 5 HP, 415 V AC.
Small air operated bending press for thin sheet. Used for light fabrication. Main ratings: bending length 600 mm, air pressure 6 bar, thickness Up to 1.5 mm.
| Function | Products | What to confirm |
|---|---|---|
| Light and training brakes | Hand Operated Press Brake, Pneumatic Press Brake Bench Type | Bending length (600 to 1000 mm), maximum gauge, air supply for the pneumatic type and bench size |
| Hydraulic production brakes | Hydraulic Press Brake 40 Tonne, Hydraulic Press Brake 63 Tonne, Hydraulic Press Brake | Tonnage, bending length, throat depth, stroke, daylight and back gauge |
| Angle controlled bending | Hydraulic Press Brake With Digital Angle Control | Digital readout resolution, angle repeatability and the stop that sets bend depth |
A mechanical press brake uses a flywheel and clutch with a fixed stroke, giving fast cycles but little control at the bottom of the stroke. A hydraulic press brake has full tonnage along the stroke and a controllable ram position, so it is safer and more adjustable. Choose hydraulic for varied jobs and training, and mechanical for fast repetitive work.
See also: Mechanical Press Brake Suppliers
The complete Hydraulic Press Brake range (6 products), in alphabetical order:
| Hand Operated Press Brake | Hydraulic Press Brake | Hydraulic Press Brake 40 Tonne |
| Hydraulic Press Brake 63 Tonne | Hydraulic Press Brake With Digital Angle Control | Pneumatic Press Brake Bench Type |
Tonnage depends on sheet thickness, material strength, vee die opening and bending length. As a rough check, doubling thickness increases the force needed about four times. Give us the thickest sheet, its material and the longest bend, and we check against 40 or 63 tonne ratings.
A set of punches and vee dies for your thickness range is needed with the machine. Ask for the die opening sizes, punch angle (often 88 degrees or 90 degrees) and tooling height. Without suitable tooling the machine cannot form accurate bends.
Ask for a front guard, foot switch with an emergency stop and a back gauge that is easy to set. A light curtain is a good option for busy shops. Check also that the foot pedal can stop the ram midway, so that a misplaced sheet can be corrected without the ram completing its stroke.
Buyers include sheet-metal fabrication units, electrical panel makers, ITIs and polytechnic workshops, and engineering colleges with a manufacturing lab. Institutes often buy a hand brake for first-year practice and a hydraulic brake with digital angle for advanced training. Panel and enclosure makers also use them to form brackets, covers and trays in small and medium batches.
Bending length varies by model, and typical lengths range from about 1250 to 2500 mm. Please state the longest sheet you bend. Longer beds need heavier frames, so a 2500 mm machine at 63 tonne weighs a good deal more than a 1250 mm one.
It displays and repeats ram position for the angle. Full CNC programming is a different class of machine. For repeated parts, the ram stop can be locked at the depth that gave the right angle, which is why a digital readout is useful in teaching.
Light gauge only. The bench pneumatic and hand brakes handle thin sheet, not heavy plate. The bench machines suit thin sheet such as 0.5 to 1.5 mm mild steel, so heavy gauge needs a hydraulic machine.
Standard hydraulic oil, usually ISO VG 46 grade, with periodic filter changes. We provide a maintenance schedule. Oil should be changed at intervals set in the manual, and a clean breather and filter keep the pump life long.
Yes, large machines can be shipped in containers with tooling. Provide destination and voltage. The ram, bed and tooling are packed separately, so we advise the crate dimensions and weights before loading.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Hydraulic Press Brake.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.