Hydraulic Press Brake

Hydraulic Press Brake

Specification

Hydraulic Press Brake is an economical, accurate and highly productive machine designed with easily accessible controls. Build with a bed, supporting the mounted and guided operating parts with a bolster plate attached to the top surface of the bed. (Daylight is the clearance from the press bed to the bolster bottom.) With a cylinder, ram, packing, piston, and seals assemble together, Frame is the main structure of the press consisting of both the working surface and cylinder. Mounted on the cylinder Ram, Moving Plate moves when cylinder extends. Determining the largest diameter piece, Throat Clearance is a distance between the frame member behind the bed to vertical centerline. Within the stroke limits, the stroke length can be set for any distance of the cylinder like the bottom of the stroke, top of the stroke and pre-slowdown point. Keeping the safety of the operator in mind, Dual Push Buttons is considered one of the most common methods of actuating hydraulic presses.

Hence, the machinery is manufactured to high standards of accuracy and durability.Master Exports India supply best Hydraulic Press Brake Machine in all over the world. Due to these various features and facilities, Master Exports India is recognized one of the best Hydraulic  Our manufactured press break machines are appreciated in the global market for their effective performance, specific outputs, higher service life, low sustaining and robust construction.

Features of Hydraulic Press Brake Machine

    Low power consuming.
    Higher efficiency due to smooth operation and low noise of the operator.
    Better safety measures for the machinery and operator.
    Due to rear cylinders, there is the low-pressure system.
    Against the fatigue failure, it has the load carrying capacity with better rigidity.
    It's fast returning and approaching speed makes it a less time-consuming machine.
    Automatic and Semi-Auto mode makes it easy for the operator.

Ton	Table Length	Table Width	Bending Cap (in MS ,UTS)	45 kg / mm2)	Clear Pass	Ram stroke	Open Height	HP
20	1500	150	1.6 x 1500	2 x 1250	1000	100	250	2
30	2000	150	2 X2000	3 x 1250	1550	100	250	3
40	2500	150	2 X2500	3 x 1500	2055	100	250	3
50	1500	190	4x1500	5 x 1250	1050	100	250	5
50	2000	190	3 x 2000	4 x 1500	1550	100	250	5
50	2500	190	2.5 x 2500	3 X2000	2055	100	250	5
65	2500	190	3 X2500	4 X2000	2055	150	330	5
65	3000	190	2.5x3000	3 x 2500	2540	150	330	5
80	2500	190	4 X2500	5 X2000	2055	150	330	7.5
80	3000	190	3 X3000	4 X2500	2540	150	330	7.5
100	2500	190	5 X2500	6 X2000	2055	150	330	7.5
100	3000	190	4 X3000	5 X2500	2540	150	330	7.5
100	4000	190	3 X4000	4 X3000	3250	150	330	7.5
125	2500	250	6 X2500	8 X2000	2055	150	350	10
125	3000	250	5 X3000	6 x2500	2540	150	350	10
125	4000	250	4 X4000	5 X 3000	3250	150	350	10
160	2500	250	8 X2500	10 X 2000	2055	150	350	15
160	3000	230	6 X3000	8 X2500	2540	150	350	15
160	4000	230	5 x 4000	6 x 3000	3100	150	350	15
200	2500	230	10 X2500	12 X 2000	2055	200	400	20
200	3000	230	8 X 3000	10x2500	2540	200	400	20