export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Hydraulic Pipe Bending Manufacturers and Suppliers in India

Hydraulic Pipe Bending Suppliers

Quick answer: Hydraulic Pipe Bending manufacturers and suppliers in India include Civil Mechanical India, offering electro hydraulic models up to 2 inch. They bend pipe without kinking. Plumbing, fabrication, boiler and structural workshops buy them. Their hydraulic action gives smooth, repeatable bends.

Plumbing, fitting and automobile trainers shopping for hydraulic pipe bending manufacturers in India need to match pipe diameter and wall thickness to the ram force. Civil Mechanical India is among the suppliers in India that offers hand pump, motorised, mandrel and portable benders, with former sets listed by pipe size.

Cold bending a pipe needs a bending former of the right radius and a ram that pushes the pipe against support rollers. The hand pump bender up to 2 inch pipe suits training and light work, and the stand version brings the machine to working height so several students can bend in turn. The electro hydraulic machine adds a motor driven pump and foot control for repeated bends.

Thin wall tubing tends to kink or flatten, so the tube bender with a mandrel supports the inside of the bend and gives smooth bends for automobile exhaust and hydraulic lines. The portable hydraulic pipe bender is a light unit for conduit and thin pipe, taken to a site or a field lab.

Last updated: November 2026

Electro Hydraulic Pipe Bending Machine

Product code: CMI-NP-0621
Buy Electro Hydraulic Pipe Bending Machine from India

Motor driven hydraulic pipe bender with foot control for repeated bends. Used in workshops to bend pipe to equal angles. Main ratings: pipe size 1/2 to 3 inch, motor 2 HP, 415 V AC, ram capacity 20 tonne.

Hydraulic Pipe Bending Machine 2 Inch

Product code: CMI-NP-0622
Buy Hydraulic Pipe Bending Machine 2 Inch from India

Hand pump hydraulic pipe bender for pipes up to 2 inch. Used in plumbing and fitting training for cold bending of steel pipe. Main ratings: pipe size 1/2 to 2 inch, ram capacity 12 tonne, pump Hand operated.

Hydraulic Pipe Bending Machine With Stand

Product code: CMI-NP-0623
Buy Hydraulic Pipe Bending Machine With Stand from India

Floor mounted hand pump hydraulic bender at working height. Used in labs where several students bend pipe in turns. Main ratings: pipe size 1/2 to 2.5 inch, ram capacity 15 tonne, pump Hand.

Hydraulic Tube Bending Machine With Mandrel

Product code: CMI-NP-0624
Buy Hydraulic Tube Bending Machine With Mandrel from India

Hydraulic tube bender fitted with a mandrel for kink free bends in thin wall tube. Used in automobile and furniture tube work training. Main ratings: tube size 1 to 2 inch, motor 3 HP, 415 V AC, mandrel Fitted.

Portable Hydraulic Pipe Bender

Product code: CMI-NP-0625
Buy Portable Hydraulic Pipe Bender from India

Light hydraulic bender for field use on conduit and thin pipes. Used by trainees for site bending practice. Main ratings: pipe size 1/2 to 1.5 inch, ram capacity 8 tonne, pump Hand.

Hydraulic Pipe Bending range by function

FunctionProductsWhat to confirm
Hand pump bendersHydraulic Pipe Bending Machine 2 Inch, Hydraulic Pipe Bending Machine With StandMaximum pipe size, bend angle (commonly up to 90 or 180 degrees), former and shoe sets and ram tonnage
Motorised bendersElectro Hydraulic Pipe Bending Machine, Hydraulic Tube Bending Machine With MandrelMotor kW, pump pressure, mandrel diameters, bend radius and wall thickness limit
Field usePortable Hydraulic Pipe BenderConduit and pipe sizes, weight of the unit, hose length and former sizes

How is this different from Roll Driven Slipout Type Bending Rollers?

Hydraulic pipe benders make a single bend at one point of the pipe by pushing it against a former. Roll driven bending rollers pass a plate, angle or pipe between rollers to make a large radius curve or a full ring. Use the hydraulic bender for sharp, localised bends in conduit and tube, and the bending rollers for rings, cylinders and gradual curves.

See also: Roll Driven Slipout Type Bending Rollers Suppliers

Full Hydraulic Pipe Bending product list

The complete Hydraulic Pipe Bending range (6 products), in alphabetical order:

Specifications and standards

How do I specify bend radius and pipe size?

Give the outer diameter, wall thickness, material (steel, copper, aluminium) and the bend radius required. A former is made for one radius, so each pipe size needs its own set. Ask for the formers to be listed in the quotation with their sizes.

When do I need a mandrel?

Thin wall tube, stainless steel and tight radii collapse or wrinkle without internal support. A mandrel prevents this, and it is common in exhaust and fluid line work. For thick wall pipe with a large radius, a mandrel is usually unnecessary.

What should be checked for safe hydraulic operation?

Look for a relief valve to protect the system, pressure gauge, hose rating and a ram that returns freely. Also check oil level and grade. Students should be shown how to clamp the pipe firmly before pumping. Check that the ram stroke matches the former size, and that the retract spring brings the ram back fully after each bend.

Who buys Hydraulic Pipe Bending?

Plumbing and pipefitter trade ITIs, polytechnic workshops, automobile labs bending exhaust and brake pipe, HVAC and electrical conduit contractors and fabrication shops all buy these. Institutes often take a hand pump bender for every few students and one motorised bender for demonstrations of repeated bends.

Related ranges

Frequently asked questions

Can the 2 inch bender handle thick pipe?

The 2 inch rating is for standard pipe, and thick wall or high tensile pipe reduces the practical size. Share your pipe schedule so we can confirm.

What is spring back in pipe bending?

After the ram is released, the pipe relaxes slightly, so the machine must over-bend by a few degrees. Trainers teach this with test bends. Spring back is larger in stiff pipe and tight radii, so the bend should be checked with a template or protractor after release.

Are formers interchangeable between machines?

Not always, since each bender has its own shoe and support roller design. Order formers with the machine. Former radius and shoe width are made for one pipe size, so mention the diameters you will bend when ordering extra sets.

Does the electro hydraulic bender need three phase?

Usually it runs from a motor of 1 to 3 kW, which may be single or three phase. Give us your supply. Small bench motors often run on 230 V single phase, but larger motorised benders need 415 V three phase, so please state yours.

Can portable benders be sent to overseas buyers?

Yes, as they are compact and pack easily. Give the destination and voltage. The portable bender and its formers weigh little, so air freight is practical, and we include a spare set of seals on request.

Tender enquiries

Request a tender quotation

We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Hydraulic Pipe Bending will be prepared accordingly.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.