export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Turning Lathe Heavy Duty Manufacturers and Suppliers in India

Turning Lathe Heavy Duty Suppliers

Quick answer: Civil Mechanical India is one of the manufacturers and suppliers of Turning Lathe Heavy Duty in India, producing gap bed and geared head lathes up to 3000 mm between centres. They turn large shafts and heavy parts. Heavy engineering workshops buy them.

Civil Mechanical India is one of the Turning Lathe Heavy Duty manufacturers in India, building rigid centre lathes for long and heavy work. For turning lathe heavy duty suppliers in India, give us the swing, centre distance and spindle bore and we will quote the lathe.

Where a standard centre lathe is sized for general training, a heavy duty lathe has a thicker bed, a larger spindle bore and a bigger motor, so it can take deep cuts on long shafts and rolls. Our six items include a gap bed lathe that can swing larger diameters over the gap, a geared head lathe with 1500 mm bed, a 3000 mm model between centres, a lathe with digital readout and a precision unit with taper turning attachment.

Centre height of 300 mm to 600 mm, bed length from 1500 mm to 3000 mm, spindle bore and main motor power are the figures to compare.

Last updated: November 2026

Heavy Duty Gap Bed Lathe Machine

Product code: CMI-NP-0878
Buy Heavy Duty Gap Bed Lathe Machine from India

A rigid cast iron centre lathe with 500 mm swing over bed and 2000 mm between centres, used for turning, facing, boring, threading and taper work in workshops and training institutes.

Heavy Duty Geared Head Lathe 1500 mm

Product code: CMI-NP-0879
Buy Heavy Duty Geared Head Lathe 1500 mm from India

A rigid cast iron centre lathe with 450 mm swing over bed and 1500 mm between centres, used for turning, facing, boring, threading and taper work in workshops and training institutes.

Heavy Duty Lathe 3000 mm Between Centres

Product code: CMI-NP-0880
Buy Heavy Duty Lathe 3000 mm Between Centres from India

A rigid cast iron centre lathe with 660 mm swing over bed and 3000 mm between centres, used for turning, facing, boring, threading and taper work in workshops and training institutes.

Heavy Duty Lathe with Digital Readout

Product code: CMI-NP-0881
Buy Heavy Duty Lathe with Digital Readout from India

A rigid cast iron centre lathe with 410 mm swing over bed and 1500 mm between centres, used for turning, facing, boring, threading and taper work in workshops and training institutes.

Heavy Duty Precision Lathe with Taper Attachment

Product code: CMI-NP-0882
Buy Heavy Duty Precision Lathe with Taper Attachment from India

A rigid cast iron centre lathe with 360 mm swing over bed and 1000 mm between centres, used for turning, facing, boring, threading and taper work in workshops and training institutes.

Turning Lathe Heavy Duty range by function

FunctionProductsWhat to confirm
Large swing workHeavy Duty Gap Bed Lathe Machine, Heavy Duty Geared Head Lathe 1500 mmSwing over bed and gap, spindle bore, speeds and motor kW
Long shaftsHeavy Duty Lathe 3000 mm Between CentresDistance between centres, bed sections, tailstock load and steady rest supplied
Accurate and tapered workHeavy Duty Lathe with Digital Readout, Heavy Duty Precision Lathe with Taper AttachmentReadout resolution, taper range, lead screw pitch and accuracy

How is a heavy duty turning lathe different from a standard turning lathe?

A standard turning lathe has a lighter bed, a smaller spindle bore and a motor sized for typical bar work and training, such as 1000 mm between centres. A heavy duty lathe has a wider, ribbed bed, a larger bore for long bars, and more motor power for deeper cuts at lower speed. It is meant for long shafts, rolls and large flanges, while the standard one suits routine and teaching use.

See also: Turning Lathe Suppliers

Full Turning Lathe Heavy Duty product list

The complete Turning Lathe Heavy Duty range (6 products), in alphabetical order:

Specifications and standards

What should be checked before ordering a heavy duty lathe?

Check centre height, distance between centres, spindle bore and spindle nose type, as these limit the job. Look at motor power, the number of speeds, the bed hardening and the carriage size. Ask for the weight, the foundation drawing and accessories such as steady rest, follow rest and four jaw chuck.

Is digital readout worth adding?

A digital readout shows carriage and cross slide position in real time, reducing dial reading errors and speeding up repeat work. It suits shops turning to close tolerances. It does not replace the lathe's rigidity or accuracy. Many buyers add it to a heavy lathe used for repair work.

Who buys Turning Lathe Heavy Duty?

Heavy engineering and fabrication workshops, railway and mining maintenance shops, sugar and cement plant workshops, engineering colleges with a large machine shop and tool rooms buy heavy duty lathes. A machine shop order may pair a heavy lathe with a milling machine, a radial drill and a grinder. A college buys one so students see large-work setups.

Related ranges

Frequently asked questions

What is a gap bed lathe?

A gap bed has a removable section of the bed near the headstock that lets larger diameter discs and flanges swing over the gap. The bed is otherwise standard for long work. It makes one lathe handle both.

What spindle bore should I choose?

A larger bore lets long bars pass through the headstock, and common heavy lathes offer 52 mm to 105 mm or more. Check your largest bar stock. A big bore also supports heavier chucks.

What does a taper attachment do?

It guides the cross slide so the tool cuts a taper over a set length, without offsetting the tailstock. This is useful for long, shallow tapers on shafts and spindles.

Do you supply heavy lathes for export?

Yes, we serve domestic customers and ship abroad. Machines are bolted on skids with slides protected. Please share the quantity and destination for packing advice.

Tender enquiries

Request a tender quotation

We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Turning Lathe Heavy Duty will be prepared accordingly.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.