export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Turning And Facing Machine Manufacturers and Suppliers in India

Turning And Facing Machine Suppliers

Quick answer: Turning and facing machines machine the ends and diameters of work, including flanges, pipe ends and valve seats, using a rotating tool or a rotating workpiece. The range includes a bench facing lathe, a cross slide facing attachment, flange and pipe facing machines and an engine valve seat kit. Civil Mechanical India is the maker of these machines.

Civil Mechanical India is among the Turning And Facing Machine manufacturers in India, covering both shop and on-site facing equipment. For turning and facing machine suppliers in India, tell us the diameter range and the component, such as flange, pipe or valve, and we will quote the unit.

Facing machines produce a flat end face square to the axis, and turning machines reduce a diameter. Our six items include a bench facing and turning lathe, a cross slide facing attachment for adding to existing lathes, an engine valve seat facing kit for cylinder heads, a flange facing machine for sealing faces and a pipe facing and bevelling machine that prepares pipe ends for welding.

Diameter capacity, tool feed, spindle speed and whether the machine clamps on the work or the work clamps on the machine decide its use.

Last updated: November 2026

Bench Facing and Turning Lathe

Product code: CMI-NP-0873
Buy Bench Facing and Turning Lathe from India

Bench Facing and Turning Lathe is a compact bench lathe for turning and facing small metal parts, designed for teaching turning and facing operations. Key features include hardened bed ways and variable speed head.

Cross Slide Facing Attachment

Product code: CMI-NP-0874
Buy Cross Slide Facing Attachment from India

Cross Slide Facing Attachment is a facing attachment that fits lathe cross slides, designed for accurate facing of larger diameters on lathes. Key features include fits standard cross slide and hSS tool.

Engine Valve Seat Facing Kit

Product code: CMI-NP-0875
Buy Engine Valve Seat Facing Kit from India

Engine Valve Seat Facing Kit is a hand set of cutters and pilots for facing engine valve seats, designed for re-cutting valve seats in cylinder heads.

Flange Facing Machine

Product code: CMI-NP-0876
Buy Flange Facing Machine from India

Flange Facing Machine is a rotating head machine that machines gasket faces on flanges, designed for dressing and re-facing flange faces on pipework. Key features include rotating tool head and automatic radial feed.

Pipe Facing and Bevelling Machine

Product code: CMI-NP-0877
Buy Pipe Facing and Bevelling Machine from India

Pipe Facing and Bevelling Machine is a clamp-on machine that faces and bevels pipe ends, designed for preparing pipe ends for welding. Key features include internal clamp on pipe bore and adjustable bevel angle.

Turning And Facing Machine range by function

FunctionProductsWhat to confirm
Shop turning and facingBench Facing and Turning Lathe, Cross Slide Facing AttachmentSwing, distance between centres, spindle speeds, cross slide travel and motor kW
Flange and pipe preparationFlange Facing Machine, Pipe Facing and Bevelling MachineDiameter range, head drive, bevel angle, clamping method and portability
Engine reconditioningEngine Valve Seat Facing KitCutter angles, pilot sizes, valve diameter range and kit case

How are turning and facing machines different from all lathe machines?

General lathes turn the workpiece between centres or in a chuck and can make shafts, threads and tapers. Turning and facing machines are narrower tools for specific jobs: facing flanges, preparing pipe ends or cutting valve seats, often clamped onto the job rather than carrying it. Use a general lathe in the shop for varied work; use a dedicated facing machine for repetitive end preparation or when the work cannot be moved.

See also: All Lathe Machines Suppliers

Full Turning And Facing Machine product list

The complete Turning And Facing Machine range (6 products), in alphabetical order:

Specifications and standards

What should I specify when ordering a facing machine?

State the diameter range of the flange or pipe, the wall thickness and the bevel angle if any. Check the drive, electric or pneumatic, the feed method and the surface finish required for sealing faces. For valve seat kits, give the valve head sizes and seat angles, commonly 30, 45 and 60 degrees.

Why use an on-site pipe facing machine instead of a lathe?

A portable pipe facing and bevelling machine clamps inside or outside the pipe and cuts the end square with the weld bevel in one setup, saving the need to cut and move long pipes. It also gives consistent bevels for welding. A bench lathe can only handle short pieces.

Who buys Turning And Facing Machine?

Piping and pressure vessel fabricators, power and process plant maintenance teams, automobile engine rebuilders, general machine shops, polytechnics and ITIs buy turning and facing equipment. A workshop order may combine the bench facing lathe with a drilling machine and a grinder. Site contractors keep portable flange facers and pipe bevellers for shutdown work.

Related ranges

Frequently asked questions

What surface finish does flange facing give?

Flange faces need a serrated or spiral finish for gasket sealing, produced by the feed rate and tool shape. Faces cut on a facing machine can meet the typical roughness required for gaskets.

What is a cross slide facing attachment?

It fits on an existing lathe's cross slide or carriage and gives a controlled feed across the work face, adding facing capability without a new machine. It is a low cost option.

What is the difference between bevelling and facing?

Facing cuts the end flat and square, while bevelling cuts an angle on the pipe edge so the weld has a groove. Many pipe machines do both in one pass.

Can you export facing machines?

Yes, we supply across India and abroad. Machines are crated with the tool heads and clamps secured. Provide the quantity and destination for a packing quote.

Tender enquiries

Request a tender quotation

Civil Mechanical India is an established manufacturer and supplier for tender requirements from India, handling civil laboratory and industrial testing tenders and bulk and OEM orders for mechanical engineering and testing laboratory equipment. On receipt of your tender specifications, we will submit a complete quotation for Turning And Facing Machine.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.