Tilting Arbour Spindle Moulder
Product code: Tilting Arbour0001Buy Tilting Arbour Spindle Moulder from India
Tilting Arbour Spindle Moulder
Civil Mechanical India is among the Tilting Arbour Spindle Moulder manufacturers in India, making moulders where the spindle can be angled for bevel cuts. For tilting arbour spindle moulder suppliers in India, tell us the spindle size and tilt range and we will quote the model.
On a standard moulder the spindle is vertical, so profile shapes come only from the cutter. A tilting arbour lets the whole spindle assembly be tilted, typically through 0 to 45 degrees, using a handwheel and scale, which cuts bevels and sloped panel edges without special tooling. Our six items include a basic tilting machine, a double spindle tilting moulder, a 40 mm spindle model, a light duty unit, a model with sliding table and a version with a power feed.
Spindle diameter, tilt range, spindle speeds and table size should be compared.
Last updated: November 2026
Tilting Arbour Spindle Moulder
Double Spindle Tilting Moulder is a moulder with two tilting arbour spindles for two profiles, designed for moulding two different profiles without changing cutters. Key features include two independent spindles and separate tilt scales.
Tilting Arbour Spindle Moulder 40 mm is a spindle moulder with a tilting arbour and 40 mm spindle, designed for moulding angled profiles and bevels on timber.
Tilting Arbour Spindle Moulder Light Duty is a light duty tilting arbour moulder, designed for training students in angled profile moulding. Key features include compact and tilting arbour.
Tilting Arbour Spindle Moulder with Sliding Table is a tilting arbour moulder with a sliding carriage, designed for angled moulding and cross cut tenoning in one machine.
Tilting Spindle Moulder with Power Feed is a tilting arbour spindle moulder supplied with a four roller power feeder, designed for continuous angled moulding at a constant feed rate.
| Function | Products | What to confirm |
|---|---|---|
| Single spindle tilting | Tilting Arbour Spindle Moulder 40 mm, Tilting Arbour Spindle Moulder Light Duty | Spindle size, tilt range, table size, speed steps and motor kW |
| Two profiles | Double Spindle Tilting Moulder | Spindle spacing, tilt on each arbour, table width and safety guards |
| Feed and cross grain | Tilting Arbour Spindle Moulder with Sliding Table, Tilting Spindle Moulder with Power Feed | Carriage travel, feeder rollers and speed, fence design and dust extraction |
An adjustable circular saw cuts straight through the timber with a rotating blade and can tilt the blade for bevel cuts. A tilting arbour spindle moulder uses a shaped cutter block and tilts the spindle so the profile is cut on the edge of the work. The saw makes the cut line; the moulder gives the shaped finish. A joinery shop usually has both, the saw first, then the moulder.
See also: Adjustable Circular Saw Suppliers
The complete Tilting Arbour Spindle Moulder range (6 products), in alphabetical order:
Check the spindle diameter (commonly 30 mm or 40 mm), the maximum tilt angle, the spindle speeds available and the lock for the tilt. Confirm the table size, fence travel and the motor power. A power feed unit and sliding table add accuracy and safety. Ask also about guards and the cutter block sizes the spindle accepts.
A double spindle machine carries two cutter blocks, so two profiles can be run in the same pass or set up in advance. It saves changeover time in a shop that runs two or three set profiles all day. For occasional shaping, a single spindle is enough.
Door, window and furniture makers, staircase and panelling shops, polytechnics, ITI wood trades and school woodworking departments buy tilting moulders. A joinery order usually includes the moulder with a panel saw, a thicknesser and a tenoner. Panel door makers value the tilt for raised panels cut in one pass.
Raised panels, bevelled edges, chamfers and splayed profiles can be cut using straight or simple cutters, because tilting the spindle changes the cut angle. A fixed spindle needs a dedicated shaped cutter for each angle.
Most tilting arbour machines tilt from 0 to 45 degrees, and some go to 90 degrees in one direction. A scale and lock keep the angle fixed during the run. Confirm the angle you need.
It is not required, but it gives a uniform finish and removes the risk of hands near the cutter when running long timber. For short training work, hand feeding with proper guards is accepted.
Yes, we supply across India and ship abroad. Machines are packed with cutter blocks removed and the table greased. Share the quantity and destination for packing advice.
We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Tilting Arbour Spindle Moulder will be prepared accordingly.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.