Sub Merge Arc Welding
Product code: Sub Merge0001Buy Sub Merge Arc Welding from India
Sub Merge Arc Welding
Civil Mechanical India is among the Sub Merge Arc Welding manufacturers in India, supplying the power sources, heads and handling gear used in SAW. If you are looking for sub merge arc welding suppliers in India, tell us the plate thickness, joint type and current you need and we will quote the set.
In SAW a continuous wire electrode feeds into a mound of granular flux, so the arc is hidden and the weld is clean. The range here has a 1000 A rectifier power source, a travelling tractor that carries the head along a seam, a twin wire head for higher deposition, a flux recovery and feeding unit and a pipe rotator that turns cylinders under a fixed head.
Workshops use SAW for pressure vessels, storage tanks, beams and line pipe. Current rating, duty cycle, wire diameter range and travel speed are what to compare.
Last updated: November 2026
Sub Merge Arc Welding
Flux Recovery and Feeding Unit is a vacuum unit that picks up unused flux and returns it to the hopper, designed for recycling submerged arc welding flux to save cost.
Pipe Rotator for SAW Welding is a pair of powered roller stands that turn pipe and shells under a fixed welding head, designed for circumferential seam welding of pipes and pressure vessel shells.
SAW Rectifier Power Source 1000 A is a heavy duty constant voltage rectifier power source for submerged arc welding, designed for supplying stable high current to SAW heads in workshops.
Submerged Arc Welding Tractor is a self propelled submerged arc welding carriage with wire feeder and flux hopper, designed for welding thick steel plate and pipe seams under a flux blanket.
Twin Wire SAW Welding Head is a dual wire submerged arc head with a common contact assembly, designed for boosting deposition rate on thick plate.
| Function | Products | What to confirm |
|---|---|---|
| Power source and head | SAW Rectifier Power Source 1000 A, Twin Wire SAW Welding Head | Rated current and duty cycle, voltage range, wire sizes and head travel |
| Travel carriage | Submerged Arc Welding Tractor | Travel speed range, wire feeder, flux hopper capacity and track or rail needs |
| Flux handling and rotation | Flux Recovery and Feeding Unit, Pipe Rotator for SAW Welding | Vacuum capacity, roller load rating, pipe diameter range and speed control |
Workshop machines as a group include cutting, forming and finishing machines. Submerged arc welding is a specific high deposition process for long straight or circular seams on thick plate. It needs a power source, a wire feed head, flux handling and a means of moving the head or the work. The result is deep penetration at high speed, which manual arc welding cannot match on heavy sections.
See also: Workshop Machines
The complete Sub Merge Arc Welding range (6 products), in alphabetical order:
| Flux Recovery and Feeding Unit | Pipe Rotator for SAW Welding | SAW Rectifier Power Source 1000 A |
| Sub Merge Arc Welding | Submerged Arc Welding Tractor | Twin Wire SAW Welding Head |
Select by the plate thickness and wire diameter: thicker plate and larger wire need more amperes, and a 1000 A source with 100 percent duty suits heavy single wire work. Check the duty cycle, the available current range, the input supply (usually 415 V three phase) and whether a constant voltage or drooping characteristic is provided.
A tractor carries the head along a flat or fillet seam on a plate or beam, so the work stays still. A pipe rotator turns a cylinder under a fixed head, giving circumferential welds on vessels and pipe. Choose by what you fabricate: plate and beams or cylinders.
Pressure vessel and tank fabricators, structural steel and bridge girder shops, pipe mills and shipyards use SAW equipment, and welding institutes buy compact sets for demonstration. A fabrication order generally pairs SAW with plate rolling, shearing and non-destructive testing equipment. Buyers usually need the full chain: power source, head, flux handling and positioning.
Unmelted flux can be collected and reused, which lowers consumption and cost. A recovery unit vacuums it from behind the weld and feeds it back to the hopper. It also keeps the work area cleaner.
Two wires fed into one pool increase the deposition rate without a higher current per wire. This gives faster travel on thick plate and wider beads. It needs a power source able to handle the combined current.
Commonly 2.4 mm to 4 mm solid wire for single wire welding, matched to a flux grade for the plate steel. Smaller wires give deeper penetration at the same current. Confirm the head can take the diameter.
Yes, we serve Indian customers and ship overseas. Power sources and heads are crated with cables and drives protected. Give us the quantity and destination for confirmation.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Sub Merge Arc Welding.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.