Monorail Gear Trolley
Product code: Monorail Gear0001Buy Monorail Gear Trolley from India
Monorail Gear Trolley
Maintenance managers and trainers who need monorail gear trolley manufacturers in India must match trolley to beam flange and load. Civil Mechanical India is one of the suppliers in India that lists plain, geared, low headroom and electric trolleys, plus a complete beam rig used for lifting practice.
A monorail system consists of a fixed I beam, a trolley that rolls on its lower flange and a hoist hanging from the trolley. A hand pushed trolley rolls when the load is pushed along the beam, which is fine for light loads. A geared trolley is moved by pulling a hand chain, so heavy loads can be shifted with little effort and stopped precisely.
The low headroom trolley uses an offset hook design for places with little space beneath the beam. The electric monorail trolley has a motor that drives the wheels for frequent, long travel. The training rig has a support frame, beam and trolley so students can practise safe lifting, travelling and lowering.
Last updated: November 2026
Monorail Gear Trolley
Chain Pulley Block with Geared Trolley is a chain hoist combined with a geared trolley for beam-mounted lifting, designed for lifting and moving loads along a beam using hand chains.
Electric Monorail Trolley is a motor driven trolley for travelling along an overhead monorail, designed for powered travel of hoists along beams in material handling labs.
Hand Pushed Monorail Trolley is a hand-pushed plain trolley for I-beam monorails, designed for moving loads along an overhead beam in workshops and laboratories. Key features include two-wheel set with steel rollers and fits standard I-beam flanges.
Low Headroom Monorail Trolley is a low-headroom trolley with an offset hook design for minimum headroom, designed for lifting in workshops with low ceiling and limited vertical space.
Monorail Beam Training Rig is a complete monorail beam setup with support frame and trolley for lifting practice, designed for teaching safe overhead lifting and trolley travel principles.
| Function | Products | What to confirm |
|---|---|---|
| Hand pushed trolleys | Hand Pushed Monorail Trolley, Low Headroom Monorail Trolley | Capacity in tonne, beam flange width range, wheel type and headroom needed |
| Geared and combined | Chain Pulley Block with Geared Trolley, Monorail Gear Trolley | Hand chain length, gear ratio, lift height of the block and beam size |
| Electric and training | Electric Monorail Trolley, Monorail Beam Training Rig | Motor kW and speed, supply and pendant control, rig frame size and beam length |
A hand chain block lifts a load up and down. A monorail trolley moves it along a beam. The two are used together: block below, trolley above. A trolley alone cannot lift. Buy a chain block when you need only a fixed lift, and add the trolley when the load has to travel along a bay.
See also: Hand Operated Spur Gear Chain Pulley Block Suppliers
The complete Monorail Gear Trolley range (6 products), in alphabetical order:
| Chain Pulley Block with Geared Trolley | Electric Monorail Trolley | Hand Pushed Monorail Trolley |
| Low Headroom Monorail Trolley | Monorail Beam Training Rig | Monorail Gear Trolley |
Measure the beam flange width and thickness and note whether the flange is parallel or tapered, as with Indian standard I beams. The trolley has adjustable side plates to suit a range of widths. Give us the beam section and the load, and we advise on wheel spacing.
A plain trolley is pushed by hand and is acceptable for light loads and short travel. A geared trolley is better for heavier loads since the hand chain gives control and a firm stop, preventing the load from swinging. Geared units also let an operator stand clear of the load while moving it, which is the safer practice in a training lab.
Beam end stops, a rated beam fixed to a strong structure, a hook with latch and a capacity plate. The training rig lets students learn load testing and inspection routines. Ask for proof load certificates. The beam should be marked with its safe working load, and end stops must be bolted at both ends before any lifting begins.
Buyers include fabrication bays, assembly lines, automobile workshops, pump and motor repair shops, engineering college labs and vocational centres. The trolley and hoist are often ordered together with the beam and fixing hardware. Pump houses and stores also buy low headroom trolleys because the beam sits close to the roof, leaving little height for the hoist.
I beams of a range of sizes, within the adjustable flange width. Provide the beam section. The wheels run on the lower flange, so the flange width and slope decide fit. Send the beam section such as ISMB 150 or 200 and we select the trolley.
The hook is offset, so the hoist hangs closer to the beam, saving height. This helps in low sheds, pump houses and under existing pipework, though the capacity per trolley should be checked against the offset design.
Normally yes, with push buttons for forward and reverse travel. A pendant station hangs from the trolley on a cable, and some buyers ask for a radio remote instead, which should be stated in the enquiry.
A support frame with beam and trolley so students can practise hoisting. It also carries a hand chain block, so trainees can lift, travel and lower loads, learn hand signals and practise inspection of the beam and hook.
Yes, with drawings and certificates. Send the tender details. Hoisting gear is often a tender item for new workshops, so we prepare drawings, load test certificates and a compliance sheet against your specification.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Monorail Gear Trolley.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.