export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Mini Welding Manufacturers and Suppliers in India

Mini Welding Suppliers

Quick answer: Mini welding equipment is compact and light enough to be carried to the job. The range has a mini inverter arc welder, a 200 A portable arc machine, a mini plasma cutter for steel up to 12 mm, a handheld spot welder and a ventilated welding training booth with bench. Civil Mechanical India makes these compact welders and supplies them to buyers in India.

Workshops and trainers searching for mini welding manufacturers in India often want small machines that run on ordinary sockets. Civil Mechanical India is among the suppliers in India that lists a mini inverter arc welder, a portable 200 A welder, a mini plasma cutter and a handheld spot welder with a training booth for students.

Inverter technology lets a stick welder be very light, so the mini inverter arc welder can be carried by hand to repair a gate or frame. The 200 A portable machine is a single phase arc welder for stick electrodes of different sizes. The mini plasma cutter uses compressed air and an electric arc to cut steel and aluminium sheet up to 12 mm.

The handheld spot welder joins thin sheets and battery tabs. For training, the welding booth has a steel bench, curtain and ventilation so an instructor can supervise several students while protecting others from arc flash.

Last updated: November 2026

Handheld Spot Welder Mini

Product code: CMI-NP-0681
Buy Handheld Spot Welder Mini from India

Handheld Spot Welder Mini is a mini hand-held spot welding unit for thin sheets and battery tabs, designed for joining thin sheet metal and nickel strips in electronics and workshop projects.

Mini Inverter ARC Welder

Product code: CMI-NP-0682
Buy Mini Inverter ARC Welder from India

Mini Inverter ARC Welder is a mini inverter based stick welding machine with very light weight, designed for portable MMA welding at training benches and maintenance sites.

Mini Plasma Cutter

Product code: CMI-NP-0683
Buy Mini Plasma Cutter from India

Mini Plasma Cutter is a small air plasma cutter that cuts steel and aluminium sheet up to 12 mm, designed for clean metal cutting in training workshops and small fabrication.

Portable Arc Welding Machine 200 A

Product code: CMI-NP-0684
Buy Portable Arc Welding Machine 200 A from India

Portable Arc Welding Machine 200 A is a portable single-phase arc welder suitable for stick electrodes of 2.0 to 3.15 mm, designed for basic arc welding practice and small fabrication jobs.

Welding Training Booth with Bench

Product code: CMI-NP-0685
Buy Welding Training Booth with Bench from India

Welding Training Booth with Bench is a ventilated welding booth with steel bench and curtain for supervised welding practice, designed for providing a safe and organised space for arc welding practice.

Mini Welding range by function

FunctionProductsWhat to confirm
Arc weldingMini Inverter ARC Welder, Portable Arc Welding Machine 200 ACurrent range, electrode sizes, duty cycle, input voltage and weight
Cutting and spot weldingMini Plasma Cutter, Handheld Spot Welder MiniCut thickness (up to 12 mm), air supply, torch type and spot welding sheet thickness
TrainingWelding Training Booth with Bench, Mini WeldingBooth size, curtain material, bench top thickness, ventilation and lighting

How is this different from Mig Tig Welding?

MIG and TIG machines are larger gas shielded welders for production and finer welds on steel, stainless and aluminium. Mini welding units are portable, lightweight and designed for stick welding, small plasma cutting and quick repairs on single phase supply. Use mini welders for site work and first lessons, and MIG or TIG for production quality.

See also: Mig Tig Welding Suppliers

Full Mini Welding product list

The complete Mini Welding range (6 products), in alphabetical order:

Specifications and standards

What current rating is enough?

A mini inverter in the 100 to 160 A range welds thin to medium steel with 2.5 mm electrodes. A 200 A machine handles 3.15 and 4 mm electrodes for thicker plate. Check duty cycle, because small machines overheat if used continuously at maximum current.

What should I check for the plasma cutter?

Look at rated clean cut thickness (often less than the severance cut), air pressure required and consumables such as nozzles and electrodes. A small compressor or air supply with a dryer is needed, since wet air damages the torch. Also check the cut quality at your usual thickness, since the maximum severance figure is not the thickness that gives a clean edge.

How should a training booth be arranged?

Provide booth walls or curtains that stop arc flash, extraction or natural ventilation, a non-flammable bench top and good lighting. One instructor can watch several booths if the layout is open at the front. A welding table with clamps, spare consumables and a first aid point help a booth to work properly as a training station.

Who buys Mini Welding?

Typical buyers are welding trade ITIs, polytechnic workshops, small fabricators, site maintenance contractors and agricultural workshops. A training centre will purchase several mini arc welders and a booth for each student group. Farm equipment workshops and small garages also buy mini welders because they work from an ordinary single phase socket.

Related ranges

Frequently asked questions

Can mini inverter welders run on a generator?

Many can, but generator size and voltage stability matter. Share generator details. A generator should be rated well above the welder's input rating, because inverter machines draw a surge when the arc strikes.

Does the plasma cutter need compressed air?

Most mini plasma cutters need an air supply or built-in compressor. Confirm the model. If the cutter has no internal compressor, you will need a dry air supply of the stated pressure and flow, such as from a small compressor.

What is the handheld spot welder for?

It joins thin sheet and battery tabs without a heavy machine. It is a light, simple tool but not meant for structural joints, because the weld is small and the heat input is low.

Are welding helmets included?

They can be added; list them in the enquiry. Helmets, gloves, aprons and chipping hammers are usually quoted as separate items so that you can choose the grade you want.

Can you supply mini welders for export?

Yes, compact units ship easily. Tell us your mains voltage. Each unit is light, so freight cost stays modest, and the plug, lead length and input voltage are set for your market before packing.

Tender enquiries

Request a tender quotation

Civil Mechanical India is one of the leading manufacturers and suppliers in India for tender requirements, covering civil laboratory and industrial testing tenders and the bulk and OEM supply of mechanical engineering and testing laboratory equipment. Kindly share your tender specifications and we shall submit a complete quotation for Mini Welding.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.