Hand Operated Threading Machine
Product code: Hand Operated0001Buy Hand Operated Threading Machine from India
Hand Operated Threading Machine
Plumbing and fitting trainers hunting for hand operated threading machine manufacturers in India need to know the diameter range and thread form first. Civil Mechanical India is among the suppliers in India that supplies bolt, rod and pipe threaders in one place, so a lab can buy the die sets that match its pipes.
Hand threading works on a simple principle: a die with cutting teeth is rotated around a rod or pipe and advances along it by the lead of the thread, which is cut with cutting oil. For pipes the ratchet handle lets the user work in a tight space and the stand model adds a chain vice and oil pot so a pipe can be clamped and threaded at bench height.
Bolt and rod threaders suit studs and long rods in maintenance work. The die and tap set, in a case, covers both external threads with dies and internal threads with taps, which is the basic skill taught in an ITI fitting trade. Thread form should be stated, for example BSP or NPT for pipe and metric or BSW for bolts.
Last updated: November 2026
Hand Operated Threading Machine
Hand operated threader for cutting external threads on rods and bolts. Used in workshops to make studs. Main ratings: size M6 to M24, dies Set, handle Hand.
Hand operated threader with long handle for threading rods and studs. Used in maintenance workshops. Main ratings: rod size M8 to M20, dies Set, handle Long.
Ratchet operated pipe threader with a die head set for cutting external pipe threads. Used in plumbing and fitting training. Main ratings: pipe size 1/2 to 2 inch, thread BSP, dies Set of 4 die heads.
Hand threader mounted on a floor stand with a chain vice and oil pot. Used in plumbing workshops for cutting pipe threads. Main ratings: pipe size 1/2 to 2 inch, thread BSP, stand Floor, 800 mm.
Hand tool set of dies and taps in a case for cutting internal and external threads. Used in fitting shops by students. Main ratings: sizes M3 to M12, set 40 piece, dies HSS.
| Function | Products | What to confirm |
|---|---|---|
| Bolt and rod threading | Hand Operated Bolt Threading Machine, Hand Operated Rod Threading Machine | Rod diameter range, thread pitch and form, and the die sets supplied |
| Pipe threading | Hand Pipe Threading Machine With Ratchet, Hand Pipe Threading Machine With Stand | Pipe size range in inches, BSP or NPT dies, chain vice capacity and oil pot |
| Internal and hand tools | Hand Threading Die And Tap Set | Thread sizes and pitches in the set, tap sequence (taper, second, plug) and die stock size |
A hex nipple threading machine is a powered production machine that threads both ends of hexagonal nipples in volume. Hand operated threaders are muscle powered, slower and used to cut a thread on a rod or pipe as needed. Choose the hand machine for training and site work, and the nipple machine when many identical nipples are produced.
See also: Hex Nipple Threading Machine Suppliers
The complete Hand Operated Threading Machine range (6 products), in alphabetical order:
Say whether you need metric, BSW, BSP or NPT, and the exact diameter range. Pipe threads for water and gas lines use tapered BSP or NPT forms, which are not interchangeable. Ask for the die heads to be listed one by one with their sizes.
A chain vice or stand to grip the pipe firmly, a cutting oil pot, a pipe cutter and a reamer for removing burrs after cutting. Without proper clamping the thread starts crooked and leaks. For site plumbing, the ratchet model is lighter to carry, but it needs a separate pipe vice or a second person to hold the pipe steady.
Cutting oil, spare dies because a die wears after repeated use, and a thread gauge or mating fitting to check fit. Request these as part of the order. A taper plug gauge or a standard fitting screwed on by hand is a quick check that the thread is long enough and not too loose.
Buyers include plumbing and fitter trade ITIs, polytechnic mechanical workshops, building maintenance teams and small plumbing contractors. Training centres usually buy a pipe threader with a stand and a die and tap set for every bench. Plumbing trades teach threading on pipe sizes from half inch upward, so a single stand-mounted threader can serve a full batch of trainees in rotation.
With a ratchet and a well oiled sharp die it takes a few minutes, though skill and pipe wall thickness matter. Students get better with practice.
Stainless needs sharper dies and heavier cutting oil. Tell us your pipe material. Dies for stainless also wear faster, so ask for a spare set and a bottle of sulphurised cutting oil with the machine.
The stand type holds the pipe rigidly so threads are straighter, while the ratchet type is more portable for site work. Choose the stand type if the same bench is used every day, and the ratchet type if the threader travels to site jobs.
Hand threading gives a general purpose fit. For precision threads a rolling or CNC process is needed. Close fits on bolts such as 6H or 6g classes are normally produced by thread rolling or by a lathe with a single point tool.
Yes, the machines are compact and crated easily. Give us your required thread standard and destination. Please note the dimensions of the longest rod you need to thread, since stand-mounted units are packed in larger crates.
As established manufacturers and suppliers for tender requirements from India, we undertake civil laboratory and industrial testing tenders as well as bulk and OEM supply of mechanical engineering and testing laboratory equipment. Please forward your tender specifications and our team will prepare a detailed quotation for Hand Operated Threading Machine.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.