export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Double Auto Mould Manufacturers and Suppliers in India

Double Auto Mould Suppliers

Quick answer: Double auto moulds cast two concrete or mortar specimens in one filling. Civil Mechanical India manufactures and supplies double cube 150 mm, double cylinder 150 x 300 mm, double beam, 70.6 mm mortar cube and paver block moulds in India for testing labs and civil engineering colleges.

Double auto mould manufacturers in India supply the twin cavity moulds that labs use to cast matched specimens quickly. Civil Mechanical India is one of the suppliers in India offering cube, cylinder, beam, mortar and paver block versions.

A double mould casts two specimens in one set up, which speeds up routine strength testing and keeps matched pairs for comparison. The 150 mm double cube mould is the common choice for concrete compressive strength tests. The 150 x 300 mm cylinder moulds suit split tensile and modulus tests.

The 100 x 100 x 500 mm double beam mould gives flexural strength specimens, and the 70.6 mm double mortar cube mould is used for cement strength tests. A two cavity paver block mould forms test blocks for strength and abrasion checks.

Last updated: November 2026

Double Auto Mould For Paver Blocks

Product code: CMI-NP-0516
Buy Double Auto Mould For Paver Blocks from India

Two cavity steel mould for casting paver block specimens. Used to prepare test blocks for strength and water absorption tests. Main ratings: block size 200 x 100 x 80 mm, cavities 2, material Steel plate 6 mm.

Double Beam Mould 100 x 100 x 500 mm

Product code: CMI-NP-0517
Buy Double Beam Mould 100 x 100 x 500 mm from India

Double gang steel beam mould for flexural strength specimens of concrete. Used to prepare two beams in a single casting. Main ratings: beam size 100 x 100 x 500 mm, gang 2 beams, material Cast iron or steel.

Double Cube Mould 150 mm

Product code: CMI-NP-0518
Buy Double Cube Mould 150 mm from India

Cast iron double gang mould that makes two 150 mm concrete cubes at one time. Used in testing labs to cast cube specimens for compressive strength tests as per IS 516.

Double Cylinder Mould 150 x 300 mm

Product code: CMI-NP-0519
Buy Double Cylinder Mould 150 x 300 mm from India

Pair of cylindrical steel moulds for concrete cylinders of 150 mm diameter and 300 mm height. Used for compressive and split tensile tests. Main ratings: cylinder size 150 mm dia x 300 mm, gang 2 cylinders, material Cast iron.

Double Mortar Cube Mould 70.6 mm

Product code: CMI-NP-0520
Buy Double Mortar Cube Mould 70.6 mm from India

Twin gang mould for 70.6 mm cement mortar cubes. Used in cement testing laboratories for compressive strength of mortar. Main ratings: cube size 70.6 mm, gang 2 cubes, material Gunmetal or cast iron.

Double Auto Mould range by function

FunctionProductsWhat to confirm
Concrete compression and tensionDouble Cube Mould 150 mm, Double Cylinder Mould 150 x 300 mmInternal dimensions and tolerance, wall thickness, base plate fit and number of bolts.
Flexural strengthDouble Beam Mould 100 x 100 x 500 mmBeam section, length, parallelism, base plate and hardness of faces.
Cement mortar and paversDouble Mortar Cube Mould 70.6 mm, Double Auto Mould For Paver BlocksCube size tolerance, material of the mould, number of cavities and paver shape.

How is this different from Auto Mould?

The Auto Mould category covers single cavity moulds. Double auto moulds have two cavities in one body, so two matched specimens are cast with one filling and compaction. They save time and storage in a busy testing lab, but need a bigger vibration table and more space for demoulding. Single moulds give more flexibility when only a few specimens are needed.

See also: Auto Mould Suppliers

Full Double Auto Mould product list

The complete Double Auto Mould range (6 products), in alphabetical order:

Specifications and standards

What should be checked before ordering concrete moulds?

Confirm the specimen size you need and the standard your lab follows, such as IS 10086 for moulds. Check internal dimension tolerance, flatness of faces, wall thickness, base plate fit, and bolt or clamp quality. Cast iron and steel both work, but finish and rust protection matter.

Why use double moulds rather than single ones?

Casting two specimens at once halves the filling, compaction and demoulding handling, which speeds up batches of cubes and gives matched pairs. For routine testing of many samples, double moulds improve lab throughput. Also check that the vibrating table can carry the weight of a filled double mould, and plan storage for the specimens.

Who buys Double Auto Mould?

Concrete and cement testing laboratories, civil engineering colleges, polytechnics, ready mix plants, construction quality control units and government test houses buy moulds. They go in orders with vibrating tables, compression testing machines and curing tanks. Government test houses also buy them for tender and compliance work.

Related ranges

Frequently asked questions

Do you supply double moulds in India and for export?

Civil Mechanical India manufactures and supplies moulds in India and for export. State the mould types, quantity and standard required. Share the mould types, quantities and the testing standard to follow, and we will confirm dimensions, packing and dispatch to your site or port.

How should moulds be maintained?

Clean after each use, apply a thin coat of mould oil before casting, and check the bolts and base plate for wear. Do not hammer on the faces.

Are moulds supplied with base plates?

Yes, moulds normally come with a base plate. Please confirm the details in your enquiry. Moulds are supplied with a base plate or clamped base, which keeps the specimen watertight during casting and compaction. Please confirm this in your enquiry if special base details are required.

Can the mortar cube mould be used for cement tests?

Yes, the 70.6 mm cube is the standard size for cement mortar strength tests. Yes, the 70.6 mm cube is the standard size for cement mortar compression tests, and two cubes can be cast per filling to give matched specimens from one mix.

Tender enquiries

Request a tender quotation

Civil Mechanical India is one of the leading manufacturers and suppliers in India for tender requirements, covering civil laboratory and industrial testing tenders and the bulk and OEM supply of mechanical engineering and testing laboratory equipment. Kindly share your tender specifications and we shall submit a complete quotation for Double Auto Mould.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.