Cylinder Block Boring Machine
Product code: Boring and Honing0001Buy Cylinder Block Boring Machine from India
Cylinder Block Boring Machine
Boring and honing machine manufacturers in India mostly serve engine reconditioning workshops and automobile training labs. As one of the suppliers in India for this equipment, Civil Mechanical India offers boring and honing machines sized to different bore diameters.
When an engine is rebuilt, worn cylinders are first bored oversize and then honed to the finish that rings need. Boring machines cut the bore true, with the cylinder block boring machine for larger blocks up to 125 mm bore and the block boring machine for smaller bores. The connecting rod boring machine corrects the big end and small end holes.
Honing machines follow, using abrasive stones to create the cross-hatch finish on the cylinder wall. The vertical honing machine and standard honing machine cover different bore lengths. The portable cylinder boring machine can be taken to an in-situ engine, useful for large stationary engines.
Last updated: November 2026
Cylinder Block Boring Machine
Block Boring Machine
A machine for connecting rod boring. Used in engine workshops. Features include boring, clamp and fixture.
A portable boring machine for cylinders. Used in site workshops. Features include portable, boring bar and clamp.
A vertical honing machine for cylinder bores. Used in engine workshops. Features include vertical, hone and stroke.
| Function | Products | What to confirm |
|---|---|---|
| Cylinder boring | Cylinder Block Boring Machine, Block Boring Machine, Portable Cylinder Boring Machine | Bore diameter range, bore length, spindle speed, stand or bed arrangement and cutting tool type. |
| Connecting rod work | Connecting Rod Boring Machine | Hole size range, rod length, fixture type and boring bar capacity. |
| Honing | Honing Machine, Vertical Honing Machine | Bore diameter range, bore length, stroke length, spindle speed, honing stones supplied and motor power. |
A drilling machine makes a new hole with a twist drill. Boring enlarges and corrects an existing hole to a precise diameter and alignment using a single point tool or boring bar, and honing finishes it with abrasive stones. For engine cylinders, drilling is not suitable, since the aim is a precisely round, straight, cross-hatched bore rather than a rough hole.
See also: Drilling Machines
The complete Boring and Honing Machine range (6 products), in alphabetical order:
| Block Boring Machine | Connecting Rod Boring Machine | Cylinder Block Boring Machine |
| Honing Machine | Portable Cylinder Boring Machine | Vertical Honing Machine |
Know the range of cylinder bore diameters and lengths you will machine, which types of engines (two wheeler, car, tractor, stationary), and whether you need portable or fixed. Check spindle speeds, motor supply, boring bar sets and honing stones included, and the stand or bed size for your blocks.
Boring sets the size and alignment, but leaves tool marks. Honing produces a cross-hatch pattern that holds oil and lets piston rings seat properly. Skipping honing shortens ring and cylinder life, so most engine reconditioning workshops need both machines.
Automobile engineering colleges, polytechnic and ITI mechanic motor vehicle trades, engine reconditioning workshops, tractor repair shops and garages buy this range. It is usually ordered with valve grinding, crankshaft and engine testing equipment. A typical engine shop order also adds valve seat cutters and a crankshaft grinder.
Civil Mechanical India manufactures and supplies these machines in India and for export. Share the bore sizes and voltage so the right model and tooling are quoted.
Models are listed with bore diameter ranges, for instance the cylinder block boring machine works across larger bores while the block boring machine covers smaller bores. Give your engine bore range for matching.
Standard tooling is usually included, but you may need extra sets for other bore sizes. List all bore sizes you expect to machine. Standard boring bars and a set of honing stones are normally quoted with the machine. Extra bars or stones for other bore sizes and for cast iron or steel liners can be added.
Yes, the portable cylinder boring machine is made for in-situ work on engines that cannot be easily moved, using a clamp and boring bar.
We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Boring and Honing Machine will be prepared accordingly.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.