Bandsaw Butt Welding
Product code: Bandsaw Butt0001Buy Bandsaw Butt Welding from India
Bandsaw Butt Welding
Bandsaw butt welding manufacturers in India are mostly asked for one thing: a reliable way to turn a snapped blade back into a usable loop. Civil Mechanical India is among the suppliers in India that offer the welder, the annealing unit and the grinder as a matched set.
A bandsaw blade is bought as a coil and welded into a loop at the shop. The weld is hard and brittle until it is annealed and the flash is ground off, which is why this range covers three stages: welding, annealing and finishing.
Manual machines suit schools and small joinery shops that weld a few blades a week. Pneumatic and hydraulic clamping models suit saw mills that rejoin wide blades daily. The combined welder with grinder keeps the whole job on one bench, which helps in training workshops where floor space is limited.
Last updated: November 2026
Bandsaw Butt Welding
A unit for annealing blade welds. Features include annealing, timer and clamp.
A manual welder for joining bandsaw blade ends. Features include manual, clamp and annealing.
A pneumatic welder for bandsaw blades. Features include pneumatic, clamp and auto.
A heavy welder for wide blades. Features include heavy, clamp and hydraulic.
A combined welder and grinder for blades. Features include combined, grinder and clamp.
| Function | Products | What to confirm |
|---|---|---|
| Blade welding | Bandsaw Blade Butt Welder Manual, Bandsaw Blade Butt Welder Pneumatic, Bandsaw Blade Welder Heavy Duty | Blade width range the clamps accept, tooth pitch, single phase or three phase supply, and whether clamping is by hand, air or hydraulics. |
| Annealing after welding | Bandsaw Blade Annealing Unit | Annealing timer range, jaw length and whether the unit is stand alone or built into the welder. |
| Weld finishing | Bandsaw Blade Welder With Grinder | Grinding wheel size, blade thickness limit and dust or spark guarding on the grinder side. |
A bandsaw machine is the cutting tool itself, with wheels, table and guides. Bandsaw butt welding equipment never cuts timber or metal. It only repairs the blade that the saw runs on. A workshop that buys a bandsaw from the Bandsaw Machine range will still need a welder if it buys blade coils or wants to rejoin broken blades. Welders are sized by blade width and thickness, not by wheel diameter, so check the widest blade you run before choosing a model.
See also: Bandsaw Machine Suppliers
The complete Bandsaw Butt Welding range (6 products), in alphabetical order:
| Bandsaw Blade Annealing Unit | Bandsaw Blade Butt Welder Manual | Bandsaw Blade Butt Welder Pneumatic |
| Bandsaw Blade Welder Heavy Duty | Bandsaw Blade Welder With Grinder | Bandsaw Butt Welding |
Start with the widest and thickest blade you weld, since each machine has a maximum width. Confirm the electrical supply (230 V single phase or 415 V three phase), the clamp type, and whether an annealing step is built in. Ask for the welding current setting range and whether spare jaws and a grinding wheel are included.
Manual models work well for schools and shops that weld a handful of blades. Pneumatic or hydraulic clamping gives consistent clamp force on wide blades and reduces operator fatigue in saw mills. If you do not have a compressed air line, a manual or hydraulic model avoids the cost of a compressor.
Saw mills, furniture workshops, polytechnic carpentry sections, ITI wood trades and metal cutting shops buy this range. In a full workshop order it sits beside the bandsaw itself and the blade sharpening machines, so the saw never waits on a fresh blade.
A poorly annealed weld can crack. Correct annealing after welding relaxes the hard joint, and grinding the flash flat lets the blade pass through the guides smoothly. Following the annealing timer on the unit is the simplest safeguard.
Yes, Civil Mechanical India manufactures and supplies these machines in India and ships to export buyers. Share your location, blade size and power supply so the quote includes the correct motor and packing.
Each model has a stated blade width and thickness limit. Small manual units handle narrow blades, while the heavy duty and hydraulic welder is built for wide log bandsaw blades. Quote your widest blade.
Yes, the Bandsaw Blade Annealing Unit is listed on its own for workshops that already own a welder. Some welders include annealing, so say which you need.
We can provide technical specifications, drawings and a compliance statement against your tender schedule on request. Please send the tender number, item description and quantity so that our team can match the machine specification to the schedule.
Civil Mechanical India is one of the leading manufacturers and suppliers in India for tender requirements, covering civil laboratory and industrial testing tenders and the bulk and OEM supply of mechanical engineering and testing laboratory equipment. Kindly share your tender specifications and we shall submit a complete quotation for Bandsaw Butt Welding.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.