export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Rockwell Hardness Testing Machine Manufacturers and Suppliers in India

Rockwell Testing Machine

Quick answer: Rockwell hardness testing machines press a diamond or ball indenter under a major and minor load and read depth as HRA, HRB or HRC. The range includes bench, motorised digital, superficial and portable models, plus a combined Brinell, Vickers and Rockwell unit. Civil Mechanical India manufactures and supplies them to labs and workshops.

Hardness readings guide heat treatment, incoming steel checks and wear studies, so the tester has to be stable and its scale correct. Civil Mechanical India is among the Rockwell hardness testing machine manufacturers in India, and the suppliers in India of bench, superficial and portable units in a single group.

A conventional Rockwell tester applies a 10 kgf preload followed by a main load, typically 60, 100 or 150 kgf, and reads the depth difference, so one machine gives the HRA, HRB and HRC scales. The motorised digital model removes dial reading and applies loads automatically for production checks. The superficial tester uses light loads of 15, 30 and 45 kgf on the N and T scales, which suits thin sheet, case hardened parts and coatings.

Portable Rockwell testers allow measurement on parts too large to put on a bench, such as rolls, dies and welded structures. The combined Brinell, Vickers and Rockwell unit adds an optical measuring system for indentation diameters and diagonals and suits metallurgy labs that compare scales.

Last updated: November 2026

Motorised Digital Rockwell Hardness Tester

Product code: CMI-NP-0257
Buy Motorised Digital Rockwell Hardness Tester from India

A bench Rockwell tester with digital readout of hardness in HRA, HRB and HRC scales. Used for quality control of steels and metals in workshops and labs.

Superficial Rockwell Hardness Tester

Product code: CMI-NP-0258
Buy Superficial Rockwell Hardness Tester from India

A Rockwell machine with light loads for measuring thin sheets, case hardened parts and coatings in the superficial scales 15N, 30N and 45N. Used in metallurgy labs.

Rockwell Hardness Testing Machine range by function

FunctionProductsWhat to confirm
Bench Rockwell testingRockwell Hardness Tester, Motorised Digital Rockwell Hardness TesterScales offered (HRA, HRB, HRC), major load steps, test height and throat depth, digital or dial readout and indenter set included.
Thin sections and coatingsSuperficial Rockwell Hardness TesterSuperficial loads (15, 30, 45 kgf), scale range (N and T), minimum specimen thickness and anvil options.
Portable testingPortable Rockwell Hardness Tester, Portable Hardness TesterWeight, testing range, clamping method for large parts, power needs and the accuracy against test blocks.
Multi-method hardnessBrinell, Vickers and Rockwell Hardness Testing UnitTest loads for each method, optical measuring system for Brinell and Vickers, and size of work the stage can hold.

How is this different from material testing machines?

Material testing machines measure bulk behaviour: tensile strength, impact energy, torsion and spring rate, and the specimen is usually broken. A hardness tester leaves only a small indentation and measures resistance to local deformation, often on finished parts. A metallurgy or QC lab will normally have both, since hardness gives a quick check and tensile testing confirms strength.

See also: Universal Testing Machines

Full Rockwell Hardness Testing Machine product list

The complete Rockwell Hardness Testing Machine range (6 products), in alphabetical order:

Specifications and standards

What should be checked before ordering a Rockwell tester?

Confirm the scales supplied (HRA, HRB, HRC and superficial N or T), the preload and major load steps, the maximum test height and throat depth for your parts, and the readout type. Ask for the test blocks, diamond cone and ball indenters and an anvil set, and the calibration to IS 1586 or ASTM E18.

When is a superficial Rockwell tester the right choice?

Use it when the part is thin, case hardened or coated, because regular major loads would punch through or read the substrate. The 15N, 30N and 45N scales use a diamond indenter on hardened surfaces. Check the minimum specimen thickness the manufacturer allows for each load.

Is a portable hardness tester accurate enough for acceptance work?

Portable testers are excellent for large or installed parts and give good comparative readings. For certificates, check the repeatability against standard test blocks and clamp the part rigidly, since movement changes depth readings. A bench unit remains the reference where parts can be brought to the lab.

Who buys Rockwell Hardness Testing Machine?

Heat treatment shops, tool rooms, forging and fastener units and steel stockists buy Rockwell testers for batch checking. Mechanical engineering and metallurgy departments use them for material science practicals, and ITIs and polytechnics keep a bench model in the workshop. Plant maintenance teams use the portable models on rolls and large shafts, and labs that want several scales add the Brinell and Vickers unit.

Related ranges

Frequently asked questions

What do HRA, HRB and HRC mean?

They are Rockwell scales using different indenters and loads. HRB uses a 1/16 inch steel ball with 100 kgf for soft steels and copper alloys, HRC uses a diamond cone with 150 kgf for hardened steels, and HRA uses the diamond with 60 kgf for very hard or thin materials.

Why does a digital Rockwell tester cost more than a dial one?

It adds a load cell or sensor, motorised load application and a display that removes operator error. It saves time on production batches, though a dial model is adequate for teaching.

Which test blocks should I buy with the machine?

Normally one block each in the low, medium and high ranges of the scales you use, such as around 30, 60 and 90 HRC. They are used to verify the machine daily, so keep spares.

Can the combined Brinell, Vickers and Rockwell unit replace three machines?

It covers the three methods in one frame, so it is useful for labs and colleges with limited space, though high-volume production checking is faster on a dedicated Rockwell unit.

Do you export Rockwell testers?

Give the destination country and mains voltage, and we will quote with packing suited to the machine's precision load mechanism, plus the spare indenters and test blocks.

Tender enquiries

Request a tender quotation

Civil Mechanical India is one of the leading manufacturers and suppliers in India for tender requirements, covering civil laboratory and industrial testing tenders and the bulk and OEM supply of mechanical engineering and testing laboratory equipment. Kindly share your tender specifications and we shall submit a complete quotation for Rockwell Hardness Testing Machine.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.