export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Concrete Testing Equipment Manufacturers and Suppliers in India

Concrete Testing Laboratory Equipments

Quick answer: Civil Mechanical India is an established supplier and manufacturer of Concrete Testing Equipment in India, covering cube moulds, mixers, weigh batchers and mini batching plants. They prepare and test concrete for workability and compressive strength. Contractors, RMC plants and colleges use them.

A concrete lab must cast, compact and measure a mix the same way every time, and that depends on well-machined moulds and correct workability tools. Civil Mechanical India is among the concrete testing equipment manufacturers in India, and among the suppliers in India who also provide self-compacting concrete test kits and small batching plants.

The range is arranged along the life of a concrete sample. Fresh-state tools include the slump cone, Vee Bee consistometer, air entrainment meter, concrete penetrometer and thermometer, and a set of SCC instruments (J-ring, O-funnel, L-box and fill box) for flowing mixes. Casting needs cube moulds, cylindrical moulds, a vibrating table or poker vibrator and a mixer, with a weigh batcher or mini mobile batching plant when mixes are proportioned by weight.

Hardened-state equipment includes the permeability apparatus, lateral extensometer for modulus and Poisson ratio, volume change apparatus, and tile flexural and abrasion testers for precast products. Compression machines are listed separately in the compression testing range.

Last updated: November 2026

Concrete Testing Equipment range by function

FunctionProductsWhat to confirm
Fresh concrete workabilitySlump Test Apparatus, Vee Bee Consistometer, J Ring Apparatus, O Funnel Apparatus, Fill Box For Scc Test, Concrete PenetrometerCone and base dimensions, standard (IS 1199, EN 12350), funnel and ring sizes for SCC, and material and finish of each part.
Moulds and compactionCube Mould, Precision Engineered Cube Mould, Cylindrical Moulds, Vibrating Table, Concrete Vibrator, Concrete Vibrator Machine With NozzleMould size (100 or 150 mm cube, 150 x 300 mm cylinder), cast iron or steel, flatness tolerance, table size and vibrator power and frequency.
Batching and mixingConcrete Mixer, Weigh Batcher, Mini Mobile Batching PlantDrum capacity, drive type, bin capacity and digital readout accuracy for the batcher, and whether the unit runs on 415 V three phase.
Hardened concrete propertiesConcrete Permeability Apparatus, Lateral Extensometer, Extensometer, Volume Change Apparatus, Tile Flexural Testing Machine, Tile Abrasion TesterPressure range and cell size, extensometer gauge length and least count, and the standard used for tile tests.

How is this different from cement testing equipment?

Concrete testing deals with the combined mix of cement, sand, aggregate and water, so the specimens are large, such as 150 mm cubes and 150 x 300 mm cylinders, and workability is a central question. Cement testing studies the binder alone on small pastes and mortars. If your lab only certifies cement supply, the cement range suffices; a site or ready-mix lab needs the concrete range.

See also: Cement Testing Lab Equipment

Full Concrete Testing Equipment product list

The complete Concrete Testing Equipment range (24 products), in alphabetical order:

Specifications and standards

What should I check before ordering cube and cylinder moulds?

Check the internal size tolerance, the flatness of the base plate and the material: cast iron or fabricated steel. IS 10086 sets limits on dimensions and parallelism, so ask for a dimension report. Confirm whether you need 100 mm or 150 mm cubes, the 150 x 300 mm cylinders, and the clamps and base plates for each.

How do I decide between slump, Vee Bee and SCC tests?

The slump cone suits mixes with 25 to 125 mm slump, and Vee Bee suits stiff mixes where slump is near zero. Self-compacting concrete needs slump flow with J-ring, O-funnel, L-box and fill box, since conventional slump is not meaningful. List which concrete grades you cast and the standard (IS 1199, EN 12350) so the right set is supplied.

Which mixer and batching equipment suits a college versus a site lab?

A small tilting or pan mixer of 40 to 100 litres is adequate for trial mixes in teaching. Site labs making 0.5 to 1 cum of trial concrete need larger drum mixers, and a weigh batcher with digital readout removes manual weighing error. Confirm bin capacity, motor power and voltage, and discharge method.

Who buys Concrete Testing Equipment?

Ready-mix plants and precast factories buy moulds, vibrators and workability tools for daily acceptance testing. Contractors on bridges and high-rise projects keep a site lab with slump, cube and permeability kit. Engineering colleges and polytechnics equip a concrete technology lab with a mixer, vibrating table and moulds, then add the SCC set for research. Orders are usually paired with a compression machine and curing tank.

Related ranges

Frequently asked questions

What slump values do the common concrete grades need?

Pumped concrete is usually specified between 75 and 125 mm, while road concrete or mass concrete may sit at 25 to 50 mm. The slump apparatus consists of a 300 mm high cone, a 16 mm tamping rod and a base plate, all of which should be in the set.

Are your cube moulds cast iron or steel?

Moulds are offered in cast iron and in fabricated steel versions, with machined faces and clamping bolts. Cast iron is heavier and more rigid, while steel moulds are lighter for site use. Specify your preference with the quote request.

What does the permeability apparatus measure?

It measures how much water passes through a concrete specimen under pressure over a set period, which indicates durability. The set contains a permeability cell, pressure lines and a reservoir, and needs a compressed air or water pressure source.

Why would a lab need a lateral extensometer?

It records the lateral strain of a cylinder under compressive load, so that Poisson's ratio can be found along with the modulus of elasticity. It is used for research labs and for acceptance of special concrete grades.

Can I get a whole concrete lab quoted together for a tender?

Send the tender specification with item numbers and the destination, and we will quote moulds, workability tools, mixers and curing equipment as one bill of quantities.

Tender enquiries

Request a tender quotation

Civil Mechanical India is an established manufacturer and supplier for tender requirements from India, handling civil laboratory and industrial testing tenders and bulk and OEM orders for mechanical engineering and testing laboratory equipment. On receipt of your tender specifications, we will submit a complete quotation for Concrete Testing Equipment.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.