Re-Circulating Air Conditioning Trainer
| Product code | RLE-0020 |
| Categories | Refrigeration & Air conditioning Lab Equipment |
| Standards | Manufactured to IS / BS / EN / ASTM / AASHTO as applicable |
| Supply | India and export — 90+ countries |
- Description
Re-Circulating Air Conditioning Trainer
The re-circulating air conditioning trainer is designed to study different air conditioning processes & performance analysis of refrigeration cycle in Air Conditioning. The trainer consists of an air-conditioned chamber which houses the electric load bank. The heater load is controlled by a dimmer. There are three ducts, each for Fresh Air, Recirculated Air & Exhaust Air. Each duct is fitted with the damper to control an amount of air flowing through it. In order to study Humidification process, a Steamer is also provided.
The refrigeration system consists of a hermetically sealed compressor, air-cooled condenser, expansion device & finned-tube evaporator. The evaporator coil is fitted inside the inlet duct. Refrigerant R-22 is used in the trainer.
The measuring instruments are provided to measure Temperature & pressure of refrigerant cycle, Refrigerant Flow, Power Supplied to compressor & Heater Load.
EXPERIMENTAL CAPABILITIES:
Specification
Product Details:
| Compressor | Hermetically Sealed |
| Capacity | 1 Ton |
| Power | 230 V AC. |
| Air Pre Heater | 500 W, 230 V AC |
| Pressure Switch | Low / High-Pressure Safety Switch |
| Thermostat | Mechanical Thermostat for Room Temperature Control |
| Pressure gauge | 0 to 500 PSI |
| Frame | Made of M.S. Square Tubes & Sheets, Welded & Powder coated. |
The re-circulating air conditioning trainer is designed to study different air conditioning processes & performance analysis of refrigeration cycle in Air Conditioning. The trainer consists of an air-conditioned chamber which houses the electric load bank. The heater load is controlled by a dimmer. There are three ducts, each for Fresh Air, Recirculated Air & Exhaust Air. Each duct is fitted with the damper to control an amount of air flowing through it. In order to study Humidification process, a Steamer is also provided.
The refrigeration system consists of a hermetically sealed compressor, air-cooled condenser, expansion device & finned-tube evaporator. The evaporator coil is fitted inside the inlet duct. Refrigerant R-22 is used in the trainer.
The measuring instruments are provided to measure Temperature & pressure of refrigerant cycle, Refrigerant Flow, Power Supplied to compressor & Heater Load.
EXPERIMENTAL CAPABILITIES:
- Demonstration of Air Conditioning Cycle.
- Calculation of coefficient of performance in Air Conditioning
- To study effect of recirculation of Air on performance of Air conditioning system
- Plotting Pressure-Enthalpy Diagram
- To study Humidification & Dehumidification Process
- Plotting Air Conditioning Process on Psychometric Chart
Re-Circulating Air Conditioning Trainer suppliers in India
Similar items you may want to view.
