Extra Heavy Duty All Geared

Extra Heavy Duty All Geared

Code: GLM0009

Extra Heavy Duty All Geared.

Type of bed Gap bed. Gap bed. Gap bed.
Width of bed 560 mm. 655 mm. 760 mm.
Height of centre 430 mm 560 mm 660 mm
Swing over bed 840 mm 1100 mm 1300 mm
Swing over saddle 600 mm 860 mm 1060 mm
Swing over cross slide 510 mm 770 mm 980 mm
Swing in gap 1250 mm 1510 mm 1710 mm
Length of gap in front of face plate 365 mm 365 mm 365 mm
No. of spindle speed. 8 8 8
Spindle speed range 20 to 275 RPM 20 to 275 RPM 16 to 195 RPM
Taper in spindle sleeve MT – 5 MT – 5 MT – 5
Spindle hollow 104 mm. 104 mm. 104 mm.
Spindle nose detail Bayonet Size 11 Bayonet Size 11 Bayonet Size 15
No. of British threads 28 28 28
Range of British threads 1.5 to 22 TPI. 1.5 to 22 TPI. 1.5 to 22 TPI.
No. of Metric threads 22 22 22
Range of Metric threads 0.75 to 16 mm 0.75 to 16 mm 0.75 to 16 mm
No. of feeds 28 28 28
Range of Longitudinal feeds 0.2 to 3.0 mm/rev 0.2 to 3.0 mm/rev 0.2 to 3.0 mm/rev
Range of Transverse feeds 0.033 to 0.50 0.033 to 0.50 0.033 to 0.50
Lead screw 50.8 mm X 2 TPI. 50.8 mm X 2 TPI. 50.8 mm X 2 TPI
Tail stock spindle diameter 95 mm. 105 mm. 115 mm.
Taper in Tail stock spindle MT – 5 MT – 6 MT – 6
Cross slide travel 430 mm. 560 mm. 660 mm.
Compound slide travel 230 mm. 230 mm. 300 mm.
Tail stock sleeve travel 220 mm. 310 mm. 410 mm.
Tool shank size 38 X 38 mm. 38 X 38 mm. 38 X 38 mm.
Tool post square 200 x 200 200 x 200 220 x 220

Add to Cart