Thermal Conductivity of Building Materials Apparatus

Thermal Conductivity of Building Materials Apparatus.
Thermal Conductivity of Building Materials Apparatus

1. Determination of the thermal conductivity of building materials
2. Thermal conductivity and thermal resistance measurement in accordance
3. Reproducible clamping pressure due to clamping device
4. 8 specimens to be put between hot and cold plate
5. Hot plate with heater mat
6. Cold plate with water cooling and heat flux sensor
7. Software controllers for temperature adjustment of hot and cold plate
8. 3 temperature sensors for the cooling water: at inlet, at outlet and a mid temperature of the hot and the cold plate
9. 2 temperature sensors for surface temperature.

Technical Data

Electric Heater Mat

1. Power: 500W
2. Max. temperature: 200°C

Specimens

1. lxLxW: 300x300mm
2. Thickness: up to 50mm
3. Material: Armaflex, grey cardboard, PMMA,
4. Polystyrene, PS, POM, cork, plaster

Measuring Ranges

1. Temperature: 3x 0…100°C, 2x 0…200°C
2. Heat flux density: 0…1.533W/m²