Flow Visualisation Wind Tunnel

Flow Visualisation Wind Tunnel

Specification

Flow Visualisation Wind Tunnel

• This is a combined wind tunnel and smoke generator powered by a synchronous a.c. motor driving a centrifugal blower and capable of producing wind speeds of 10 m/s in the test section.
• Low turbulence air flow is achieved by the use of 3 gauze screens, a fine honeycomb and a 9:1 contraction.
• The test section is 25mm x 250mm x 250mm and has a viewing area that can be illuminated by an integral strip light.
• Models are mounted in the viewing area on a rotatable support.
• Provision is made for a smoke rake immediately before the contraction. Smoke is produced by the atomisation of a heated, medicinal quality, white oil in an air stream.
• The resulting vapour is non-hazardous and gives a highly visible smoke ideal for photography. A basic set of models is provided.
• A technical manual including product description installation operation and maintenance manual.

Dimensions and weight

• 1500 x 300 x 715 mm – 75 Kg

Essential requirements

• Voltage : 220 V – 50 Hz