Aircraft Aluminium Alloy Electrical Conductivity Eddy Current Meter

Hand-held eddy current conductivity meter that checks heat treatment condition of aluminium alloy parts in IACS percent. Used by aerospace MRO shops and forging inspection.

Specification

The probe is placed on the part, and conductivity is read directly in percent IACS or MS/m. Temper variations in 2024, 7075 and 6061 alloys are detected quickly without damaging the surface of the aircraft part.

Features

• Direct read in percent IACS and MS/m
• 60 kHz operating frequency with temperature compensation
• Lift-off compensation to 0.2 mm paint
• Calibration with two aluminium reference blocks
• Rugged hand-held housing with large display

Technical Specifications

Conductivity range	0.5 to 112 percent IACS
Accuracy	+/- 0.5 percent IACS
Frequency	60 kHz
Probe diameter	12 mm
Lift-off range	Up to 0.2 mm
Temperature compensation	Automatic, 10 to 40 deg C
Standards	ASTM E1004, AMS 2658 procedure
Power	Rechargeable Li-ion battery

Standard Accessories

• Reference block set
• Probe cable
• Charger