export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Surveying Instruments Manufacturers and Suppliers in India

Surveying Instruments

Quick answer: Civil Mechanical India is a manufacturer and supplier of Surveying Instruments across India, including planimeters, clinometers, surveyors compasses and steel tapes. They measure land area, slope and distance in the field. Civil engineering colleges, surveyors and contractors buy them.

Colleges that buy surveying instruments from manufacturers in India expect rugged, accurate hand tools that hold calibration. Civil Mechanical India is among the suppliers in India of compasses, clinometers, tapes and planimeters for plotting and field practice in survey labs.

This group holds the measuring tools that give directions, slopes, distances and areas. A brass surveyor compass on a tripod reads magnetic bearings for compass surveying, a hand held clinometer gives slope angle, and a 30 m steel tape in a case measures distances.

Two planimeters measure area from plans: a polar arm model with a dial and an electronic digital model with a display. Together they cover compass surveying, taping and area computation in a civil or surveying syllabus. Optical instruments, such as theodolites and levels, are listed in their own category.

Last updated: November 2026

Brass Surveyors Compass Tripod

Product code: CMI-NP-0334
Buy Brass Surveyors Compass Tripod from India

A circular compass for bearings in the field. Used in compass survey. Features include liquid damped, sight vanes and brass.

Electronic Digital Area Planimeter

Product code: CMI-NP-0335
Buy Electronic Digital Area Planimeter from India

An electronic planimeter with digital display for area measurement. Used in maps and drawing. Features include digital display, unit change and memory.

Hand Held Clinometer

Product code: CMI-NP-0336
Buy Hand Held Clinometer from India

A hand held instrument for measuring angle of slope. Used in field survey. Features include hand held, bubble and sight.

Polar Arm Area Planimeter

Product code: CMI-NP-0337
Buy Polar Arm Area Planimeter from India

A polar planimeter for measuring area of irregular figures on maps. Used in survey. Features include tracer arm, dial and measuring wheel.

Steel Tape 30 m

Product code: CMI-NP-0338
Buy Steel Tape 30 m from India

A steel tape wound in a case for accurate distance measurement. Used in surveying. Features include steel blade, case and handle.

Surveying Instruments range by function

FunctionProductsWhat to confirm
Direction and slopeBrass Surveyors Compass Tripod, Hand Held ClinometerCompass diameter and graduation, needle lift and damping, tripod type, and clinometer scale range.
Distance measurementSteel Tape 30 mTape width and thickness, graduation (metric or both), case type and end hook or ring.
Area measurementPolar Arm Area Planimeter, Electronic Digital Area PlanimeterMeasurable area range, resolution and units, tracer arm length, and battery or power for the digital model.

How is Surveying Instruments different from Optical Instruments?

Surveying instruments here are simple mechanical or electronic tools such as a compass, a tape and planimeters, so they are lighter and cheaper to maintain. Optical instruments use telescopes and prisms to sight over long distances, as with levels and theodolites. A student survey lab combines them: tapes and compasses for the first practicals, optical instruments later. If you need long-range angles or levelling, buy optical instruments, and for bearings, slopes and areas this group is sufficient.

See also: Optical Instruments

Full Surveying Instruments product list

The complete Surveying Instruments range (5 products), in alphabetical order:

Specifications and standards

What should be checked before ordering surveying instruments?

Check the compass graduation and damping, tape length and material, and planimeter measuring range and resolution. Confirm the material of the case, and whether a tripod is included with the compass. For the digital planimeter check battery type and units supported, and ask about a test scale for verification.

How is a planimeter calibrated?

A planimeter is checked by tracing a figure of known area, such as a square or circle, and comparing the reading with the true value. Digital models are set to the scale of the drawing. Keep the tracer arm and wheel clean to avoid error.

Who buys Surveying Instruments?

Civil engineering colleges, polytechnics, ITI surveyor trades, survey departments, mining and forest teams and contractors buy these instruments. They are normally purchased along with field supplies, tripods and optical instruments to equip a complete survey lab, and planimeters are also used by drawing and map offices.

Related ranges

Frequently asked questions

What is a surveyor's compass used for?

It measures the bearing of a line against magnetic north, so compass traverses can be run and plotted. The tripod holds it level at each station.

Why use a steel tape instead of a cloth tape?

A steel tape holds its length with little stretch, so distances are more accurate. Cloth tapes can stretch and shrink, and are used for rough measurements.

Can you supply surveying instruments for government tenders?

Civil Mechanical India supplies surveying instruments in India to colleges, departments and contractors and can quote against your tender list. Send item details and quantities.

Do you export surveying instruments?

Yes, surveying instruments can be packed for export shipments, with compasses and planimeters protected in their own cases. Share the destination country, item list and quantity so freight and packing can be planned.

Tender enquiries

Request a tender quotation

Civil Mechanical India is an established manufacturer and supplier for tender requirements from India, handling civil laboratory and industrial testing tenders and bulk and OEM orders for mechanical engineering and testing laboratory equipment. On receipt of your tender specifications, we will submit a complete quotation for Surveying Instruments.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.