Safety Footwear Toe Cap Impact Tester

Falling mass tester that drops a striker onto steel toe caps to measure clearance under impact. Used in safety shoe manufacture and certification. It checks that toe protection survives a 200 J strike while leaving enough room.

Specification

A 20 kg striker falls from a height to give 200 J impact over the toe of a safety shoe. A clay plug measures remaining clearance after impact, which must exceed 14 mm to 20 mm.

Features

• Striker mass 20 kg
• 200 J energy
• Guide rails with electromagnetic release
• Clay plug fixture
• Shoe holder

Technical Specifications

Impact energy	200 J +/-4 J
Striker mass	20 +/-0.2 kg
Drop height	approx. 1.02 m
Striker edge	Steel 25 mm
Clearance measure	Clay cylinder
Anvil	Steel 100 kg
Power	230 V AC, 50 Hz
Standards	ISO 20344, EN ISO 20345, IS 15298

Standard Accessories

• Clay plugs
• Shoe holder
• Height gauge