export@civilmechanicalindia.com Exporting to 90+ countries IS · BS · EN · ASTM · AASHTO

Opto-Mechatronics Training System Manufacturers and Suppliers in India

Opto-Mechatronics Training System

Quick answer: Opto-Mechatronics Training System modules are made by Civil Mechanical India, a manufacturer and supplier in India, for laser beam alignment, optical encoder position measurement and light intensity control. Engineering colleges and training labs buy them.

A measurement-focused lab does not always need every optical module. For opto-mechatronics training system manufacturers in India, this selection offers alignment, position, speed and spectral measurement. As suppliers in India, we build each module on the same modular base, so the group can be extended later.

The Laser Beam Alignment Training System is a precision trainer using a laser and adjustable mounts to teach beam steering and alignment. The Optical Encoder Position Measurement Training System studies quadrature signals, while the Optical Rotational Speed Measurement Training System measures motor speed with an optical sensor.

The Photoelectric Detection and Counting Training System counts objects with photoelectric sensors, and the Spectrometer Optical Measurement Training System works with a grating spectrometer. The Opto-Mechatronics Training System base unit describes the shared modular structure on which these experiments run.

Last updated: November 2026

Laser Beam Alignment Training System

Product code: CMI-NP-1774
Buy Laser Beam Alignment Training System from India

Laser Beam Alignment Training System is a precision alignment trainer using a laser, mirrors and position-sensitive detector.

Spectrometer Optical Measurement Training System

Product code: CMI-NP-1782
Buy Spectrometer Optical Measurement Training System from India

Spectrometer Optical Measurement Training System is a system with a grating spectrometer module, light source and PC interface for absorption and colour measurement.

Opto-Mechatronics Training System range by function

FunctionProductsWhat to confirm
Alignment and spectroscopyLaser Beam Alignment Training System, Spectrometer Optical Measurement Training SystemLaser class, mount adjustment resolution, grating lines per mm, wavelength range
Position and speedOptical Encoder Position Measurement Training System, Optical Rotational Speed Measurement Training SystemEncoder lines, quadrature outputs, motor type, speed range, display or PC readout
Detection and countingPhotoelectric Detection and Counting Training SystemSensor type, counter capacity, object speed, output signals
Base systemOpto-Mechatronics Training SystemNumber of module slots, base frame, power supply, signal conditioning

How is this different from Photodiode and Phototransistor Characteristics Training System?

A photodiode and phototransistor system plots how a single detector responds to light level and bias, which is device physics. The modules on this page apply optics to measurement: alignment, encoder position, speed, counting and spectra. Choose the detector system for semiconductor optoelectronics practicals. Choose these modules for instrumentation and mechatronics measurement practicals.

Full Opto-Mechatronics Training System product list

The complete Opto-Mechatronics Training System range (6 products), in alphabetical order:

Specifications and standards

What should be confirmed before ordering the alignment and spectrometer modules?

Check the laser class and power, mount adjustment resolution, grating specification, wavelength range and available readout, whether on a screen, a scale or software. Also confirm the base stability and stray light shielding, because these influence the quality of measurements. Add a request for spare mounts and a protective cover to keep optical surfaces clean.

How accurate are the encoder and speed modules?

Accuracy depends on encoder lines and the counter or display. For classroom use, hundreds of lines per revolution are enough to show quadrature signals. Confirm outputs for oscilloscope and PLC connection. Ask for the quadrature outputs to be brought out to terminals, so the encoder signal can be viewed on an oscilloscope or counted by a PLC during the same practical session.

Who buys Opto-Mechatronics Training System?

Instrumentation and mechatronics departments, physics and photonics labs in colleges and polytechnic measurement labs buy these modules. They are usually ordered with oscilloscopes, counters and sensor trainers when upgrading an electronics or instrumentation laboratory. Often two or three modules are ordered at a time for a single lab.

Related ranges

Frequently asked questions

How accurate is the Optical Encoder Position Measurement Training System?

Accuracy depends on the encoder resolution, so students convert pulses to angle or linear distance and compare with a scale. Ask for the pulses per revolution and the display resolution.

Can rotational speed be measured at different rpm?

Yes, the Optical Rotational Speed Measurement Training System reads a disc with a photo sensor and shows rpm. Confirm the speed range, the number of slots and the display type.

What does photoelectric counting teach?

Students place objects on a belt or disc and a photo sensor counts them with set thresholds. This shows debounce and miscount sources. Check the sensor response time and the counter capacity.

How is laser beam alignment checked?

The Laser Beam Alignment Training System has adjustable mirror or lens mounts so students align a beam to a target and read the error. Ask for the mount adjustment resolution and the laser class.

Tender enquiries

Request a tender quotation

Civil Mechanical India is an established manufacturer and supplier for tender requirements from India, handling civil laboratory and industrial testing tenders and bulk and OEM orders for mechanical engineering and testing laboratory equipment. On receipt of your tender specifications, we will submit a complete quotation for Opto-Mechatronics Training System.

  • Civil laboratory & industrial testing tenders
  • Mechanical engineering & testing lab equipment
  • Bulk and OEM supply
Send Tender Specifications Quotation prepared against your tender specifications
Get a quotation

Planning a civil engineering laboratory or replying to a tender?

Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.