Advanced Electro Pneumatic Training System
Product code: CIVIL-APT-106-0001Buy Advanced Electro Pneumatic Training System from India
Advanced Electro Pneumatic Training System Tools
Buyers who want the advanced electro pneumatic training system from manufacturers in India often look for configuration details. As suppliers in India, Civil Mechanical India can configure the panel with solenoid valves, sensors and a PLC, so you can match the specification of your tender or syllabus closely.
The training system is built on a pneumatic base with solenoid valves, double acting cylinders, sensors and control relays or a PLC. Students first build circuits on the panel, then add sequence control and fault finding, then connect to a PLC workstation.
Companion units broaden the work: the sequence control trainer for cycles such as A+B+B-A-, the circuit troubleshooting panel, the PLC controlled workstation, a sorting station with feeder and pusher, and a proportional system. Configurations differ by cylinder count, valve type and control choice, so the specification should be agreed before ordering.
Last updated: November 2026
Advanced Electro Pneumatic Training System Tools
A panel with fault insertion switches in an electro pneumatic circuit, used to teach systematic fault finding in solenoid, sensor and wiring faults.
A sequence control trainer for building A+B+B-A- type cycles with solenoid valves, limit switches and relay logic, used to teach pneumatic circuit design.
A workstation combining a PLC, solenoid valves and pneumatic cylinders on a profile board, used to teach programmable control of pneumatic automation.
A pneumatic sorting station with feeder, sensors and pusher cylinders that sorts parts by material or height, used to teach sensor and actuator integration under PLC control.
A proportional pneumatic training system with a proportional pressure regulator, valve and sensors, used to study analog control of pneumatic force and position.
| Function | Products | What to confirm |
|---|---|---|
| Standard electro pneumatic circuits | Advanced Electro Pneumatic Training System | Number of cylinders and valves, valve type, 24 V DC supply, relay modules and panel size. |
| Sequence work | Electro Pneumatic Sequence Control Trainer | Maximum sequence length, sensor count, timers and counters. |
| Diagnostic exercises | Electro Pneumatic Circuit Troubleshooting Training Panel | Faults inserted (wiring, valve, sensor), and whether a fault key is provided. |
| Automation applications | PLC Controlled Electro Pneumatic Training Workstation, Pneumatic Sorting Station Training Set, Proportional Pneumatic Training System | PLC details, sorting sensors, proportional valve control and required software. |
A basic pneumatic system uses manually or pneumatically operated valves and cylinders to teach air preparation, logic and simple circuits. An electro pneumatic system adds solenoid valves, sensors and relay or PLC control, so circuits are electrical and sequenced. Start with basic pneumatics for the first term, then move to electro pneumatics for automation and sequencing.
See also: Basic Pneumatic Training System
The complete Advanced Electro Pneumatic Training System range (6 products), in alphabetical order:
Choose the number of double acting and single acting cylinders, valve count and type, sensor types (magnetic reed or inductive), and relay or PLC control. Confirm panel format, such as profile panel or trolley, and whether tubing, a compressor and software are included. Share the experiment list so we match the configuration.
Control voltage is typically 24 V DC, and the trainers run from 230 V single phase supply through an internal power unit. Tender specifications may also ask for relevant safety markings, which should be stated early. Tender documents may also ask for relevant safety markings, so mention them early in the enquiry.
Two to three students per station is practical for hands on work. Plan the number of stations from your batch size and lab schedule so everyone gets time at the panel. Add a second station if you have a large batch so groups do not wait for long.
Technical colleges, polytechnics, ITIs and training centres, usually as part of a mechatronics lab with hydraulics, PLC and sensor trainers. Orders also include compressors, tubes, spare valves and software. Industry apprenticeship schemes also buy the system to train new maintenance staff.
Yes, if the course is already familiar with basic pneumatics. Start with circuits, then proceed to sequence and PLC control. It works best after students understand basic pneumatics, symbols and air supply preparation.
Send your specifications for a detailed offer. Send the tender specification and delivery country and we will quote with packing and the required paperwork.
Many labs buy the base system first and add the PLC workstation later. Confirm compatibility of signals at the time of order. Confirm the PLC details at the base order so wiring and terminals are ready.
It is a movement order: cylinder A extends, B extends, B retracts, then A retracts. It teaches sequence control with sensors. Students program it using limit sensors to confirm each movement.
We are leading manufacturers and suppliers for tender requirements from India, serving civil laboratory and industrial testing tenders and supplying mechanical engineering and testing laboratory equipment in bulk and on OEM terms. Send us your tender specifications, and a complete quotation for Advanced Electro Pneumatic Training System will be prepared accordingly.
Send us your equipment list or tender specification. We quote against IS, BS, EN, ASTM and AASHTO standards and ship to 90+ countries.