Signal Generator and Amplifier

The earth provided is connected to the physical earth through the power cord; the signal generator output is floating with respect to ground. Do not open the unit as this will make your warranty void.

Power supply unit with detachable power lead for easy storage

The Signal generator is a robust instrument and can withstand prolonged short circuit for the output. 

 

High Impedance Output: Maximum 17V peak to peak from internal source impedance of 600ñ

Low Impedance output: 6V R.M.S. at 4ñ (about 8.8V peak for all waveforms)

Maximum Power output of 4.5W available over the entire frequency range for all waveforms.

Maximum Power Transfer occurs when the load is 4ñ, giving 62/(4+4) = 4.5W

Frequency Range: 0.1 Hz to 99.9 KHz in six decades, read on digital display.

Frequency Accuracy: 0.01% (100 ppm) in all ranges

Output waveform: Sine, Rectangular and Triangular

Amplifier voltage gain: 100

Frequency Response: DC to 100KHz, -3 dB, output power 4.5W into 4ñ load

Controls : All control settings except amplitude are stored and updated upon any changes.

Electric Supply: 220V~240V, 50Hz

Amplitude Control: Variable from zero to maximum output in 256 increments, amplitude is displayed by a 10 segment bar graph

Attenuation: x1, x 0.1, x0.01, ±1%, operating only on the 600ñ output.

Weight : Approx. 2.05kg , without power cord

Dimensions: approx. 210mm x155mm x 118mm L X W x D